[PATCH v2 11/15] arm64: dts: ti: use 'freq-table' in UFS node
From: Krzysztof Kozlowski <hidden>
Date: 2022-02-22 15:00:54
Also in:
linux-arm-msm, linux-devicetree, linux-mediatek, linux-samsung-soc, linux-scsi, lkml
Subsystem:
arm/texas instruments k3 architecture, the rest · Maintainers:
Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Linus Torvalds
The 'freq-table-hz' property is deprecated by UFS bindings. The uint32-array requires also element to be passed within one <> block. Signed-off-by: Krzysztof Kozlowski <redacted> --- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 599861259a30..34aff40c6b8e 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi@@ -1257,7 +1257,9 @@ ufs@4e84000 { compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0"; reg = <0x0 0x4e84000 0x0 0x10000>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - freq-table-hz = <250000000 250000000>, <19200000 19200000>, <19200000 19200000>; + freq-table = <250000000 250000000>, + <19200000 19200000>, + <19200000 19200000>; clocks = <&k3_clks 277 0>, <&k3_clks 277 1>, <&k3_clks 277 1>; clock-names = "core_clk", "phy_clk", "ref_clk"; dma-coherent;
--
2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel