[PATCH v21 2/8] arm64: dts: mt8183: add svs device information
From: Roger Lu <hidden>
Date: 2022-01-07 09:52:23
Also in:
linux-devicetree, linux-mediatek, linux-pm, lkml
Subsystem:
arm/mediatek soc support, the rest · Maintainers:
Matthias Brugger, AngeloGioacchino Del Regno, Linus Torvalds
Add compitable/reg/irq/clock/efuse setting in svs node. Signed-off-by: Roger Lu <redacted> --- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index ba4584faca5a..9de6aa59d9a7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi@@ -743,6 +743,18 @@ status = "disabled"; }; + svs: svs@1100b000 { + compatible = "mediatek,mt8183-svs"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_THERM>; + clock-names = "main"; + nvmem-cells = <&svs_calibration>, + <&thermal_calibration>; + nvmem-cell-names = "svs-calibration-data", + "t-calibration-data"; + }; + thermal: thermal@1100b000 { #thermal-sensor-cells = <1>; compatible = "mediatek,mt8183-thermal";
@@ -1261,6 +1273,10 @@ mipi_tx_calibration: calib@190 { reg = <0x190 0xc>; }; + + svs_calibration: calib@580 { + reg = <0x580 0x64>; + }; }; u3phy: t-phy@11f40000 {
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel