[PATCH 13/18] arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: 2021-12-08 15:13:13
Also in:
dri-devel, linux-devicetree, linux-rockchip
Subsystem:
the rest · Maintainer:
Linus Torvalds
This enabled the VOP2 display controller along with hdmi and the required port routes which is enough to get a picture out of the hdmi port of the board. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- .../boot/dts/rockchip/rk3568-evb1-v10.dts | 31 +++++++++++++++++++ 1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
index 184e2aa2416af..b1b0963fa8525 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts@@ -7,6 +7,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> #include "rk3568.dtsi" / {
@@ -106,6 +107,12 @@ &gmac1m1_rgmii_clk status = "okay"; }; +&hdmi { + status = "okay"; + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; +}; + &i2c0 { status = "okay";
@@ -390,3 +397,27 @@ &sdmmc0 { &uart2 { status = "okay"; }; + +&vop { + status = "okay"; + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; +}; + +&vop_mmu { + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&vp0 { + vp0_out_hdmi: endpoint@RK3568_VOP2_EP_HDMI { + reg = <RK3568_VOP2_EP_HDMI>; + remote-endpoint = <&hdmi_in_vp0>; + }; +};
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel