Il 24/12/21 10:27, Roger Lu ha scritto:

Hi AngeloGioacchino,

Sorry for the late reply and thanks for all the advices.

On Thu, 2021-10-21 at 10:46 +0200, AngeloGioacchino Del Regno wrote:

quoted

Il 28/04/21 08:54, Roger Lu ha scritto:

quoted

The Smart Voltage Scaling(SVS) engine is a piece of hardware
which calculates suitable SVS bank voltages to OPP voltage table.
Then, DVFS driver could apply those SVS bank voltages to PMIC/Buck
when receiving OPP_EVENT_ADJUST_VOLTAGE.

Signed-off-by: Roger Lu <redacted>
---
   drivers/soc/mediatek/Kconfig   |   10 +
   drivers/soc/mediatek/Makefile  |    1 +
   drivers/soc/mediatek/mtk-svs.c | 1723 ++++++++++++++++++++++++++++++++
   3 files changed, 1734 insertions(+)
   create mode 100644 drivers/soc/mediatek/mtk-svs.c

[snip]

quoted

quoted

+/* svs bank common setting */
+#define SVSB_DET_CLK_EN			BIT(31)
+#define SVSB_TZONE_HIGH_TEMP_MAX	U32_MAX
+#define SVSB_RUNCONFIG_DEFAULT		0x80000000
+#define SVSB_DC_SIGNED_BIT		0x8000
+#define SVSB_INTEN_INIT0x		0x00005f01
+#define SVSB_INTEN_MONVOPEN		0x00ff0000
+#define SVSB_EN_OFF			0x0
+#define SVSB_EN_MASK			0x7
+#define SVSB_EN_INIT01			0x1
+#define SVSB_EN_INIT02			0x5
+#define SVSB_EN_MON			0x2
+#define SVSB_INTSTS_MONVOP		0x00ff0000
+#define SVSB_INTSTS_COMPLETE		0x1
+#define SVSB_INTSTS_CLEAN		0x00ffffff
+
+static DEFINE_SPINLOCK(mtk_svs_lock);
+
+/*

Thanks for using kernel-doc!! However, to be proper, this has to be
/**
   * ..........

Oh okay. Thanks. I will use /** to add multi-line comments. However, I checked
kernel doc-guide and it uses indent as below. So, I'll follow it. If I'm doing
it wrong, please correct me. Thanks a lot.
https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html

/**
  * .........

You're welcome! By the way, yes, the indentation is as shown on the documentation.

Regards,
- Angelo

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel