Thread (12 messages) 12 messages, 2 authors, 2021-12-22

Re: [PATCH 4/4] media: aspeed: Fix timing polarity incorrect

From: Joel Stanley <joel@jms.id.au>
Date: 2021-12-22 01:22:53
Also in: linux-aspeed, linux-media, lkml, openbmc

On Fri, 17 Dec 2021 at 09:54, Jammy Huang [off-list ref] wrote:
quoted hunk ↗ jump to hunk
This is a workaround for polarity unstable.
Sync value get by VR09C counts from sync's rising edge, which means
sync's polarity is negative if sync value is bigger than total/2.

Signed-off-by: Jammy Huang <redacted>
---
 drivers/media/platform/aspeed-video.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index 5ad3a20c5bac..f628f69bb7dd 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -989,6 +989,15 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
                video->frame_top = FIELD_GET(VE_SRC_TB_EDGE_DET_TOP,
                                             src_tb_edge);
                det->vsync = FIELD_GET(VE_SYNC_STATUS_VSYNC, sync);
+               /*
+                * Workaround for polarity detection
+                * Use sync(VR098) counts from sync's rising edge till falling
+                * edge to tell sync polarity.
+                */
+               if (det->vsync > (FIELD_GET(VE_MODE_DETECT_V_LINES, mds) >> 1))
Are you right shifting as this is the value / 2? I think it's clearer
to write / 2 instead of >> 1.

Mention in the comment that this is a workaround for when the sync
value is larger than half.
quoted hunk ↗ jump to hunk
+                       det->polarities &= ~V4L2_DV_VSYNC_POS_POL;
+               else
+                       det->polarities |= V4L2_DV_VSYNC_POS_POL;
                if (det->polarities & V4L2_DV_VSYNC_POS_POL) {
                        det->vbackporch = video->frame_top - det->vsync;
                        det->vfrontporch =
@@ -1010,6 +1019,15 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
                video->frame_left = FIELD_GET(VE_SRC_LR_EDGE_DET_LEFT,
                                              src_lr_edge);
                det->hsync = FIELD_GET(VE_SYNC_STATUS_HSYNC, sync);
+               /*
+                * Workaround for polarity detection
+                * Use sync(VR098) counts from sync's rising edge till falling
+                * edge to tell sync polarity.
+                */
+               if (det->hsync > (htotal >> 1))
+                       det->polarities &= ~V4L2_DV_HSYNC_POS_POL;
+               else
+                       det->polarities |= V4L2_DV_HSYNC_POS_POL;
                if (det->polarities & V4L2_DV_HSYNC_POS_POL) {
                        det->hbackporch = video->frame_left - det->hsync;
                        det->hfrontporch = htotal - video->frame_right;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help