[PATCH V2 06/10] arm64: dts: imx8mq: Enable both G1 and G2 VPU's with vpu-blk-ctrl
From: Adam Ford <hidden>
Date: 2021-12-16 11:13:50
Also in:
linux-devicetree, linux-media, linux-rockchip, linux-staging, lkml
Subsystem:
arm/freescale imx / mxc arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
With the Hantro G1 and G2 now setup to run independently, update the device tree to allow both to operate. This requires the vpu-blk-ctrl node to be configured. Since vpu-blk-ctrl needs certain clock enabled to handle the gating of the G1 and G2 fuses, the clock-parents and clock-rates for the various VPU's to be moved into the pgc_vpu because they cannot get re-parented once enabled, and the pgc_vpu is the highest in the chain. Signed-off-by: Adam Ford <redacted>
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 972766b67a15..5029c121d48b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi@@ -711,7 +711,21 @@ pgc_gpu: power-domain@5 { pgc_vpu: power-domain@6 { #power-domain-cells = <0>; reg = <IMX8M_POWER_DOMAIN_VPU>; - clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>; + clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>, + <&clk IMX8MQ_CLK_VPU_G1_ROOT>, + <&clk IMX8MQ_CLK_VPU_G2_ROOT>; + assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>, + <&clk IMX8MQ_CLK_VPU_G2>, + <&clk IMX8MQ_CLK_VPU_BUS>, + <&clk IMX8MQ_VPU_PLL_BYPASS>; + assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>, + <&clk IMX8MQ_VPU_PLL_OUT>, + <&clk IMX8MQ_SYS1_PLL_800M>, + <&clk IMX8MQ_VPU_PLL>; + assigned-clock-rates = <600000000>, + <600000000>, + <800000000>, + <0>; }; pgc_disp: power-domain@7 {
@@ -1432,30 +1446,31 @@ usb3_phy1: usb-phy@382f0040 { status = "disabled"; }; - vpu: video-codec@38300000 { - compatible = "nxp,imx8mq-vpu"; - reg = <0x38300000 0x10000>, - <0x38310000 0x10000>, - <0x38320000 0x10000>; - reg-names = "g1", "g2", "ctrl"; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "g1", "g2"; + vpu_g1: video-codec@38300000 { + compatible = "nxp,imx8mq-vpu-g1"; + reg = <0x38300000 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>; + power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>; + }; + + vpu_g2: video-codec@38310000 { + compatible = "nxp,imx8mq-vpu-g2"; + reg = <0x38310000 0x10000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>; + power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>; + }; + + vpu_blk_ctrl: blk-ctrl@38320000 { + compatible = "fsl,imx8mq-vpu-blk-ctrl"; + reg = <0x38320000 0x100>; + power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>; + power-domain-names = "bus", "g1", "g2"; clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>, - <&clk IMX8MQ_CLK_VPU_G2_ROOT>, - <&clk IMX8MQ_CLK_VPU_DEC_ROOT>; - clock-names = "g1", "g2", "bus"; - assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>, - <&clk IMX8MQ_CLK_VPU_G2>, - <&clk IMX8MQ_CLK_VPU_BUS>, - <&clk IMX8MQ_VPU_PLL_BYPASS>; - assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>, - <&clk IMX8MQ_VPU_PLL_OUT>, - <&clk IMX8MQ_SYS1_PLL_800M>, - <&clk IMX8MQ_VPU_PLL>; - assigned-clock-rates = <600000000>, <600000000>, - <800000000>, <0>; - power-domains = <&pgc_vpu>; + <&clk IMX8MQ_CLK_VPU_G2_ROOT>; + clock-names = "g1", "g2"; + #power-domain-cells = <1>; }; pcie0: pcie@33800000 {
--
2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel