[PATCH v10 05/10] i915/gvt: use dyndbg.BITGRPS for existing pr_debugs
From: Jim Cromie <jim.cromie@gmail.com>
Date: 2021-11-11 22:02:41
Also in:
amd-gfx, dri-devel, intel-gfx, linux-arm-msm, lkml
Subsystem:
drm drivers, intel drm i915 driver (meteor lake, dg2 and older excluding poulsbo, moorestown and derivative), the rest · Maintainers:
David Airlie, Simona Vetter, Jani Nikula, Joonas Lahtinen, Rodrigo Vivi, Tvrtko Ursulin, Linus Torvalds
The gvt component of this driver has ~120 pr_debugs with formats using
one of 9 fixed string prefixes, which are quite similar to those
enumerated in DRM debug categories. Following the interface model of
drm.debug, add a parameter to map bits to these format prefixes.
static struct dyndbg_bitdesc i915_bitmap[] = {
[0] = { "gvt:cmd:" },
[1] = { "gvt:core:" },
[2] = { "gvt:dpy:" },
[3] = { "gvt:el:" },
[4] = { "gvt:irq:" },
[5] = { "gvt:mm:" },
[6] = { "gvt:mmio:" },
[7] = { "gvt:render:" },
[8] = { "gvt:sched:" }
};
DEFINE_DYNAMIC_DEBUG_BITGRPS(debug_gvt, __gvt_debug,
"dyndbg bitmap desc",
If CONFIG_DYNAMIC_DEBUG_CORE=y, then gvt/Makefile adds
-DDYNAMIC_DEBUG_MODULE to cflags, which CONFIG_DYNAMIC_DEBUG=n
(CORE-only) builds need. This is redone more comprehensively soon.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
---
drivers/gpu/drm/i915/Makefile | 2 ++
drivers/gpu/drm/i915/intel_gvt.c | 38 ++++++++++++++++++++++++++++++++
2 files changed, 40 insertions(+)
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 660bb03de6fc..0fa5f53312a8 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile@@ -317,6 +317,8 @@ i915-y += intel_gvt.o include $(src)/gvt/Makefile endif +ccflags-$(CONFIG_DYNAMIC_DEBUG_CORE) += -DDYNAMIC_DEBUG_MODULE + obj-$(CONFIG_DRM_I915) += i915.o obj-$(CONFIG_DRM_I915_GVT_KVMGT) += gvt/kvmgt.o
diff --git a/drivers/gpu/drm/i915/intel_gvt.c b/drivers/gpu/drm/i915/intel_gvt.c
index 4e70c1a9ef2e..efaac5777873 100644
--- a/drivers/gpu/drm/i915/intel_gvt.c
+++ b/drivers/gpu/drm/i915/intel_gvt.c@@ -162,3 +162,41 @@ void intel_gvt_resume(struct drm_i915_private *dev_priv) if (intel_gvt_active(dev_priv)) intel_gvt_pm_resume(dev_priv->gvt); } + +#if defined(CONFIG_DRM_USE_DYNAMIC_DEBUG) + +unsigned long __gvt_debug; +EXPORT_SYMBOL(__gvt_debug); + +static struct dyndbg_bitdesc i915_dyndbg_bitmap[] = { + [0] = { "gvt:cmd:" }, + [1] = { "gvt:core:" }, + [2] = { "gvt:dpy:" }, + [3] = { "gvt:el:" }, + [4] = { "gvt:irq:" }, + [5] = { "gvt:mm:" }, + [6] = { "gvt:mmio:" }, + [7] = { "gvt:render:" }, + [8] = { "gvt:sched:" } +}; + +#define help_(_N, _cat) "\t Bit-" #_N ":\t" _cat "\n" + +#define I915_GVT_CATEGORIES(name) \ + " Enable debug output via /sys/module/i915/parameters/" #name \ + ", where each bit enables a debug category.\n" \ + help_(0, "gvt:cmd:") \ + help_(1, "gvt:core:") \ + help_(2, "gvt:dpy:") \ + help_(3, "gvt:el:") \ + help_(4, "gvt:irq:") \ + help_(5, "gvt:mm:") \ + help_(6, "gvt:mmio:") \ + help_(7, "gvt:render:") \ + help_(8, "gvt:sched:") + +DEFINE_DYNAMIC_DEBUG_BITGRPS(debug_gvt, __gvt_debug, + I915_GVT_CATEGORIES(debug_gvt), + i915_dyndbg_bitmap); + +#endif
--
2.31.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel