Re: [PATCH] arm64: dts: imx8m: add syscon node for display_blk_ctrl module regs

On Mon, Nov 1, 2021 at 5:58 PM Tommaso Merciai [off-list ref] wrote:

On Mon, Nov 01, 2021 at 11:35:49PM +0100, Ahmad Fatoum wrote:

quoted

Hello Tommaso,

On 01.11.21 23:28, Tommaso Merciai wrote:

quoted

Add system controller node for registers of module Display Block Control
(DISPLAY_BLK_CTRL, base address: 0x32e28000).
The DISPLAY_BLK_CTRL module contains general purpose registers (GPRs),
which control varied features of the associated peripherals.
Reference: IMX8MMRM Rev. 3, 11/2020, p 3897
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 2f632e8ca388..3e496b457e1a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi

@@ -961,6 +961,11 @@ aips4: bus@32c00000 {
                    #size-cells = <1>;
                    ranges = <0x32c00000 0x32c00000 0x400000>;

+                   dispmix_gpr: display-gpr@32e28000 {
+                           compatible = "fsl, imx8mm-iomuxc-gpr", "syscon";

Please read vendor patches before submitting them. The space
is out-of-place in the compatible and the compatible is wrong:
This doesn't look like a i.MX8MM pin controller.

Cheers,
Ahmad

  Hi Ahmad,
  Thanks for your review. Do you think this is correct?

  compatible = "fsl,imx8mm-dispmix-gpr", "syscon";

  Let me know.

There was already a driver created for the blk-ctrl stuff and it has a
device tree binding at 32e28000.  It's tied into the power-domain
system, so if you want to enable the csi, dsi, or lcd, etc. you can
just reference the blt-ctrl power domain index, and it enables the
device's gpc power domain and takes the corresponding device out of
reset.

adam

  Thanks,
  Tommaso

quoted

quoted

+                           reg = <0x32e28000 0x100>;
+                   };
+
                    usbotg1: usb@32e40000 {
                            compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
                            reg = <0x32e40000 0x200>;

--
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel