Re: [PATCH v3 0/3] ARM: prepare and add netgear gs110emx support
From: Gregory CLEMENT <gregory.clement@bootlin.com>
Date: 2021-10-13 14:43:49
Also in:
linux-devicetree, lkml, netdev
Hello Marcel Ziswiler,
Cleanup mvebu_v7_defconfig and then add support for the Netgear GS110EMX which is an 8 port Gigabit switch with two additional Multi-Gig ports. An 88E6390X switch sits at its core connecting to two 88X3310P 10G PHYs while the control plane is handled by an 88F6811 Armada 381 SoC. Changes in v3: - Got rid of unused 3.3 volt regulator as suggested by Andrew. - Got rid of partitioning comment. - Added switch interrupt GPIO configuration. Changes in v2: - Add Andrew's reviewed-by tag. - Add Andrew's reviewed-by tag. - Send previous first patch separately to netdev mailing list as suggested by Andrew. - Fix numbering of the PHY labels as suggested by Andrew. Marcel Ziswiler (3): ARM: mvebu_v7_defconfig: enable mtd physmap ARM: mvebu_v7_defconfig: rebuild default configuration
Both applied on mvebu/defconfig
ARM: dts: mvebu: add device tree for netgear gs110emx switch
Applied on mvebu/dt Thanks, Gregory
arch/arm/boot/dts/Makefile | 1 + .../boot/dts/armada-381-netgear-gs110emx.dts | 295 ++++++++++++++++++ arch/arm/configs/mvebu_v7_defconfig | 18 +- 3 files changed, 304 insertions(+), 10 deletions(-) create mode 100644 arch/arm/boot/dts/armada-381-netgear-gs110emx.dts -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
-- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel