Re: [PATCH v3 3/3] ARM: dts: mvebu: add device tree for netgear gs110emx switch
From: Andrew Lunn <andrew@lunn.ch>
Date: 2021-10-07 21:00:14
Also in:
linux-devicetree, lkml, netdev
On Thu, Oct 07, 2021 at 10:56:59PM +0200, Marcel Ziswiler wrote:
Add the device tree for a Netgear GS110EMX switch featuring 8 Gigabit ports and 2 Multi-Gig ports (100M/1G/2.5G/5G/10G). An 88E6390X switch sits at its core connecting to two 88X3310P 10G PHYs. The control plane is handled by an 88F6811 Armada 381 SoC. The following functionality is tested: - 8 gigabit Ethernet ports connecting via 88E6390X to the 88F6811 - serial console UART - 128 MB commercial grade DDR3L SDRAM - 16 MB serial SPI NOR flash The two 88X3310P 10G PHYs while detected during boot seem neither to detect any link nor pass any traffic. Signed-off-by: Marcel Ziswiler <redacted>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel