[PATCH v4 06/14] irqchip/irq-bcm7038-l1: Switch to IRQCHIP_PLATFORM_DRIVER
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2021-10-09 02:20:54
Also in:
linux-devicetree, linux-mips, lkml
Subsystem:
broadcom bmips mips architecture, irqchip drivers, the rest · Maintainers:
Florian Fainelli, Thomas Gleixner, Linus Torvalds
Allow the user selection and building of this interrupt controller driver as a module since it is used on ARM/ARM64 based systems as a second level interrupt controller hanging off the ARM GIC and is therefore loadable during boot. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/irqchip/Kconfig | 4 +++- drivers/irqchip/irq-bcm7038-l1.c | 6 +++++- 2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 4d5924e9f766..3022f6137096 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig@@ -115,7 +115,9 @@ config BCM6345_L1_IRQ select GENERIC_IRQ_EFFECTIVE_AFF_MASK config BCM7038_L1_IRQ - bool + tristate "Broadcom STB 7038-style L1/L2 interrupt controller driver" + depends on ARCH_BRCMSTB || BMIPS_GENERIC + default ARCH_BRCMSTB || BMIPS_GENERIC select GENERIC_IRQ_CHIP select IRQ_DOMAIN select GENERIC_IRQ_EFFECTIVE_AFF_MASK
diff --git a/drivers/irqchip/irq-bcm7038-l1.c b/drivers/irqchip/irq-bcm7038-l1.c
index 357570dd8780..a62b96237b82 100644
--- a/drivers/irqchip/irq-bcm7038-l1.c
+++ b/drivers/irqchip/irq-bcm7038-l1.c@@ -455,4 +455,8 @@ static int __init bcm7038_l1_of_init(struct device_node *dn, return ret; } -IRQCHIP_DECLARE(bcm7038_l1, "brcm,bcm7038-l1-intc", bcm7038_l1_of_init); +IRQCHIP_PLATFORM_DRIVER_BEGIN(bcm7038_l1) +IRQCHIP_MATCH("brcm,bcm7038-l1-intc", bcm7038_l1_of_init) +IRQCHIP_PLATFORM_DRIVER_END(bcm7038_l1) +MODULE_DESCRIPTION("Broadcom STB 7038-style L1/L2 interrupt controller"); +MODULE_LICENSE("GPL v2");
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel