[PATCH 6/9] ARM: dts: renesas: Add compatible properties to uPD6061x Ethernet PHYs
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: 2021-09-09 08:50:06
Also in:
linux-devicetree, linux-renesas-soc, netdev
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add compatible values to Ethernet PHY subnodes representing Renesas uPD60610 or uPD60611 PHYs on RZ/A1 boards. This allows software to identify the PHY model at any time, regardless of the state of the PHY reset line. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm/boot/dts/r7s72100-genmai.dts | 2 ++ arch/arm/boot/dts/r7s72100-rskrza1.dts | 2 ++ 2 files changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
index 07d611d2b7b52756..1e8447176b1051f3 100644
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts@@ -108,6 +108,8 @@ ðer { renesas,no-ether-link; phy-handle = <&phy0>; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-idb824.2814", + "ethernet-phy-ieee802.3-c22"; reg = <0>; }; };
diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index 8363f5e9a4acc275..9bfa7d8e2888b9ee 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts@@ -193,6 +193,8 @@ ðer { renesas,no-ether-link; phy-handle = <&phy0>; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-idb824.2814", + "ethernet-phy-ieee802.3-c22"; reg = <0>; }; };
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel