[PATCH v1 5/5] drm/panel: st7703: Add media bus format
flat view
STALE1833d
SUPERSEDED
From: Guido Günther <agx@sigxcpu.org>
Date: 2021-09-28 12:16:44
Also in:
dri-devel, lkml
Subsystem:
drm driver for sitronix st7703 panels, drm drivers, drm drivers and misc gpu patches, drm panel drivers, the rest · Maintainers:
Guido Günther, David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Neil Armstrong, Linus Torvalds
Revision v1 of 3 in this series.
Revisions (3)
- v1 current
- v2 [diff vs current]
- v3 [diff vs current]
This allows the DSI bridge to detect the correct bus format. We currently only support MEDIA_BUS_FMT_RGB888_1X24. Signed-off-by: Guido Günther <agx@sigxcpu.org> --- drivers/gpu/drm/panel/panel-sitronix-st7703.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
index a2c303e5732c..73f69c929a75 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c@@ -453,6 +453,10 @@ static int st7703_prepare(struct drm_panel *panel) return ret; } +static const u32 mantix_bus_formats[] = { + MEDIA_BUS_FMT_RGB888_1X24, +}; + static int st7703_get_modes(struct drm_panel *panel, struct drm_connector *connector) {
@@ -474,6 +478,10 @@ static int st7703_get_modes(struct drm_panel *panel, connector->display_info.height_mm = mode->height_mm; drm_mode_probed_add(connector, mode); + drm_display_info_set_bus_formats(&connector->display_info, + mantix_bus_formats, + ARRAY_SIZE(mantix_bus_formats)); + return 1; }
--
2.33.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel