[PATCH v1 4/5] drm/panel: mantix: Add media bus format
flat view
STALE1830d
From: Guido Günther <agx@sigxcpu.org>
Date: 2021-09-28 12:16:42
Also in:
dri-devel, lkml
Subsystem:
drm driver for mantix mlaf057we51 panels, drm drivers, drm drivers and misc gpu patches, drm panel drivers, the rest · Maintainers:
Guido Günther, David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Neil Armstrong, Linus Torvalds
Revision v1 of 3 in this series.
Revisions (3)
- v1 current
- v2 [diff vs current]
- v3 [diff vs current]
This allows the DSI bridge to detect the correct bus format. We currently only support MEDIA_BUS_FMT_RGB888_1X24. Signed-off-by: Guido Günther <agx@sigxcpu.org> --- drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
index f0e9bce23c41..d6bcf1045255 100644
--- a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
+++ b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c@@ -8,6 +8,7 @@ #include <linux/backlight.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> +#include <linux/media-bus-format.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/regulator/consumer.h>
@@ -232,6 +233,10 @@ static const struct drm_display_mode default_mode_ys = { .height_mm = 130, }; +static const u32 mantix_bus_formats[] = { + MEDIA_BUS_FMT_RGB888_1X24, +}; + static int mantix_get_modes(struct drm_panel *panel, struct drm_connector *connector) {
@@ -253,6 +258,10 @@ static int mantix_get_modes(struct drm_panel *panel, connector->display_info.height_mm = mode->height_mm; drm_mode_probed_add(connector, mode); + drm_display_info_set_bus_formats(&connector->display_info, + mantix_bus_formats, + ARRAY_SIZE(mantix_bus_formats)); + return 1; }
--
2.33.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel