[PATCH 03/10] dts: aspeed: ast2600: Support SDR50 for SD device
From: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Date: 2021-09-22 10:31:53
Also in:
linux-aspeed, linux-clk, linux-devicetree, linux-mmc, lkml, openbmc
Subsystem:
the rest · Maintainer:
Linus Torvalds
The maximum frequency for SD controller on AST2600 EVB is 100MHz. In order to achieve 100MHz, sd-uhs-sdr50 property should be added and the driver will set the SDR50 supported bit in capability 2 register during probing stage. Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com> --- arch/arm/boot/dts/aspeed-ast2600-evb.dts | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index b7eb552640cb..4551dba499c2 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts@@ -280,6 +280,7 @@ &sdhci0 { status = "okay"; bus-width = <4>; + sd-uhs-sdr50; max-frequency = <100000000>; sdhci-drive-type = /bits/ 8 <3>; sdhci-caps-mask = <0x7 0x0>;
@@ -292,6 +293,7 @@ &sdhci1 { status = "okay"; bus-width = <4>; + sd-uhs-sdr50; max-frequency = <100000000>; sdhci-drive-type = /bits/ 8 <3>; sdhci-caps-mask = <0x7 0x0>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel