[PATCH v3 1/5] arm64: dts: ls1088a: add internal PCS for DPMAC1 node
From: Mathew McBride <hidden>
Date: 2021-08-10 05:39:40
Also in:
linux-devicetree
Subsystem:
arm/freescale layerscape arm architecture, the rest · Maintainers:
Frank Li, Linus Torvalds
A previous patch added the PCS for DPMAC2 only, as used for the AQR PHY on the LS1088ARDB. DPMAC1 PCS access is required for PHYLINK SFP support on the Traverse Ten64 board. Signed-off-by: Mathew McBride <redacted> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> --- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 2fa6cfbef01f..79ceadc9dc4a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi@@ -765,6 +765,19 @@ emdio2: mdio@8b97000 { status = "disabled"; }; + pcs_mdio1: mdio@8c07000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c07000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs1: ethernet-phy@0 { + reg = <0>; + }; + }; + pcs_mdio2: mdio@8c0b000 { compatible = "fsl,fman-memac-mdio"; reg = <0x0 0x8c0b000 0x0 0x1000>;
--
2.30.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel