Thread (25 messages) read the whole thread 25 messages, 4 authors, 2021-08-10
STALE1816d

Revision v1 of 3 in this series.

Revisions (3)
  1. v1 current
  2. v2 [diff vs current]
  3. v3 [diff vs current]

[PATCH 0/5] Add Traverse Technologies Ten64 board DTS

From: Mathew McBride <hidden>
Date: 2021-07-22 04:26:18
Also in: linux-devicetree

The Traverse Technologies Ten64 board is a networking-oriented
Mini-ITX form factor appliance using the NXP LS1088A SoC.

This patch series adds a basic device tree (fsl-ls1088a-ten64.dts)
for the board. At the moment only hardware features supported
(or soon to be supported) by mainline kernels are described.

In the course of verifying the DTS on recent kernels, it
was found that some LS1088A features were not described
in fsl-ls1088a.dtsi. The first two patches add them.

The device tree includes a reference to the Epson RX-8035
RTC which depends on this patch series:
"rtc: Implement support for EPSON RX-8035", reviewed but
not yet in the Linus tree.
https://lore.kernel.org/linux-rtc/20210709044518.28769-1-matt@traverse.com.au/T/#t (local)

Mathew McBride (5):
  arm64: dts: ls1088a: add internal PCS for DPMAC1 node
  arm64: dts: ls1088a: add missing PMU node
  dt-bindings: vendor-prefixes: add Traverse Technologies
  dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) board
  arm64: dts: add device tree for Traverse Ten64 (LS1088A)

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/fsl-ls1088a-ten64.dts  | 374 ++++++++++++++++++
 .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi |  18 +
 5 files changed, 401 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts

-- 
2.30.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help