Thread (49 messages) 49 messages, 7 authors, 2021-11-16

Re: [PATCH v2 08/15] peci: Add device detection

From: Dan Williams <hidden>
Date: 2021-08-27 19:01:24
Also in: linux-aspeed, linux-devicetree, linux-doc, linux-hwmon, lkml, openbmc

On Tue, Aug 3, 2021 at 4:35 AM Iwona Winiarska
[off-list ref] wrote:
quoted hunk ↗ jump to hunk
Since PECI devices are discoverable, we can dynamically detect devices
that are actually available in the system.

This change complements the earlier implementation by rescanning PECI
bus to detect available devices. For this purpose, it also introduces the
minimal API for PECI requests.

Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Reviewed-by: Pierre-Louis Bossart <redacted>
---
 drivers/peci/Makefile   |   2 +-
 drivers/peci/core.c     |  33 ++++++++++++
 drivers/peci/device.c   | 114 ++++++++++++++++++++++++++++++++++++++++
 drivers/peci/internal.h |  14 +++++
 drivers/peci/request.c  |  50 ++++++++++++++++++
 5 files changed, 212 insertions(+), 1 deletion(-)
 create mode 100644 drivers/peci/device.c
 create mode 100644 drivers/peci/request.c
diff --git a/drivers/peci/Makefile b/drivers/peci/Makefile
index 926d8df15cbd..c5f9d3fe21bb 100644
--- a/drivers/peci/Makefile
+++ b/drivers/peci/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only

 # Core functionality
-peci-y := core.o
+peci-y := core.o request.o device.o
 obj-$(CONFIG_PECI) += peci.o

 # Hardware specific bus drivers
diff --git a/drivers/peci/core.c b/drivers/peci/core.c
index 7b3938af0396..d143f1a7fe98 100644
--- a/drivers/peci/core.c
+++ b/drivers/peci/core.c
@@ -34,6 +34,20 @@ struct device_type peci_controller_type = {
        .release        = peci_controller_dev_release,
 };

+static int peci_controller_scan_devices(struct peci_controller *controller)
+{
+       int ret;
+       u8 addr;
+
+       for (addr = PECI_BASE_ADDR; addr < PECI_BASE_ADDR + PECI_DEVICE_NUM_MAX; addr++) {
+               ret = peci_device_create(controller, addr);
+               if (ret)
+                       return ret;
+       }
+
+       return 0;
+}
+
 static struct peci_controller *peci_controller_alloc(struct device *dev,
                                                     struct peci_controller_ops *ops)
 {
@@ -76,10 +90,23 @@ static struct peci_controller *peci_controller_alloc(struct device *dev,
        return ERR_PTR(ret);
 }

+static int unregister_child(struct device *dev, void *dummy)
+{
+       peci_device_destroy(to_peci_device(dev));
+
+       return 0;
+}
+
 static void unregister_controller(void *_controller)
 {
        struct peci_controller *controller = _controller;

+       /*
+        * Detach any active PECI devices. This can't fail, thus we do not
+        * check the returned value.
+        */
+       device_for_each_child_reverse(&controller->dev, NULL, unregister_child);
+
        device_unregister(&controller->dev);
 }
@@ -115,6 +142,12 @@ struct peci_controller *devm_peci_controller_add(struct device *dev,
        if (ret)
                return ERR_PTR(ret);

+       /*
+        * Ignoring retval since failures during scan are non-critical for
+        * controller itself.
+        */
+       peci_controller_scan_devices(controller);
+
        return controller;

 err:
diff --git a/drivers/peci/device.c b/drivers/peci/device.c
new file mode 100644
index 000000000000..32811248997b
--- /dev/null
+++ b/drivers/peci/device.c
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2018-2021 Intel Corporation
+
+#include <linux/peci.h>
+#include <linux/slab.h>
+
+#include "internal.h"
+
+static int peci_detect(struct peci_controller *controller, u8 addr)
+{
+       struct peci_request *req;
+       int ret;
+
+       /*
+        * PECI Ping is a command encoded by tx_len = 0, rx_len = 0.
+        * We expect correct Write FCS if the device at the target address
+        * is able to respond.
+        */
+       req = peci_request_alloc(NULL, 0, 0);
+       if (!req)
+               return -ENOMEM;
Seems a waste to do a heap allocation for this routine. Why not:

       /*
        * PECI Ping is a command encoded by tx_len = 0, rx_len = 0.
        * We expect correct Write FCS if the device at the target address
        * is able to respond.
        */
       struct peci_request req = { 0 };
+
+       mutex_lock(&controller->bus_lock);
+       ret = controller->ops->xfer(controller, addr, req);
+       mutex_unlock(&controller->bus_lock);
+
+       peci_request_free(req);
+
+       return ret;
+}
+
+static bool peci_addr_valid(u8 addr)
+{
+       return addr >= PECI_BASE_ADDR && addr < PECI_BASE_ADDR + PECI_DEVICE_NUM_MAX;
+}
+
+static int peci_dev_exists(struct device *dev, void *data)
+{
+       struct peci_device *device = to_peci_device(dev);
+       u8 *addr = data;
+
+       if (device->addr == *addr)
+               return -EBUSY;
+
+       return 0;
+}
+
+int peci_device_create(struct peci_controller *controller, u8 addr)
+{
+       struct peci_device *device;
+       int ret;
+
+       if (WARN_ON(!peci_addr_valid(addr)))
The WARN_ON is overkill, especially as there is only one caller of
this and it loops through valid addresses.
+               return -EINVAL;
+
+       /* Check if we have already detected this device before. */
+       ret = device_for_each_child(&controller->dev, &addr, peci_dev_exists);
+       if (ret)
+               return 0;
+
+       ret = peci_detect(controller, addr);
+       if (ret) {
+               /*
+                * Device not present or host state doesn't allow successful
+                * detection at this time.
+                */
+               if (ret == -EIO || ret == -ETIMEDOUT)
+                       return 0;
+
+               return ret;
+       }
+
+       device = kzalloc(sizeof(*device), GFP_KERNEL);
+       if (!device)
+               return -ENOMEM;
+
+       device->addr = addr;
+       device->dev.parent = &controller->dev;
+       device->dev.bus = &peci_bus_type;
+       device->dev.type = &peci_device_type;
+
+       ret = dev_set_name(&device->dev, "%d-%02x", controller->id, device->addr);
+       if (ret)
+               goto err_free;
It's cleaner to just have one unified error exit using put_device().
Use the device_initialize() + device_add() pattern, not
device_register().

+
+       ret = device_register(&device->dev);
+       if (ret)
+               goto err_put;
+
+       return 0;
+
+err_put:
+       put_device(&device->dev);
+err_free:
+       kfree(device);
+
+       return ret;
+}
+
+void peci_device_destroy(struct peci_device *device)
+{
+       device_unregister(&device->dev);
No clear value for this wrapper, in fact in one caller it causes it to
do a to_peci_device() just this helper can undo that up-cast.
quoted hunk ↗ jump to hunk
+}
+
+static void peci_device_release(struct device *dev)
+{
+       struct peci_device *device = to_peci_device(dev);
+
+       kfree(device);
+}
+
+struct device_type peci_device_type = {
+       .release        = peci_device_release,
+};
diff --git a/drivers/peci/internal.h b/drivers/peci/internal.h
index 918dea745a86..57d11a902c5d 100644
--- a/drivers/peci/internal.h
+++ b/drivers/peci/internal.h
@@ -8,6 +8,20 @@
 #include <linux/types.h>

 struct peci_controller;
+struct peci_device;
+struct peci_request;
+
+/* PECI CPU address range 0x30-0x37 */
+#define PECI_BASE_ADDR         0x30
+#define PECI_DEVICE_NUM_MAX    8
+
+struct peci_request *peci_request_alloc(struct peci_device *device, u8 tx_len, u8 rx_len);
+void peci_request_free(struct peci_request *req);
+
+extern struct device_type peci_device_type;
+
+int peci_device_create(struct peci_controller *controller, u8 addr);
+void peci_device_destroy(struct peci_device *device);

 extern struct bus_type peci_bus_type;
diff --git a/drivers/peci/request.c b/drivers/peci/request.c
new file mode 100644
index 000000000000..81b567bc7b87
--- /dev/null
+++ b/drivers/peci/request.c
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2021 Intel Corporation
+
+#include <linux/export.h>
+#include <linux/peci.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include "internal.h"
+
+/**
+ * peci_request_alloc() - allocate &struct peci_requests
+ * @device: PECI device to which request is going to be sent
+ * @tx_len: TX length
+ * @rx_len: RX length
+ *
+ * Return: A pointer to a newly allocated &struct peci_request on success or NULL otherwise.
+ */
+struct peci_request *peci_request_alloc(struct peci_device *device, u8 tx_len, u8 rx_len)
+{
+       struct peci_request *req;
+
+       if (WARN_ON_ONCE(tx_len > PECI_REQUEST_MAX_BUF_SIZE || rx_len > PECI_REQUEST_MAX_BUF_SIZE))
WARN_ON_ONCE() should only be here to help other kernel developers not
make this mistake However, another way to enforce this is to stop
exporting peci_request_alloc() and instead export helpers for specific
command types, and keep this detail internal to the core. If you keep
this, it needs a comment that it is only here to warn other
peci-client developers of their bug before it goes upstream.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help