[PATCH v1 0/7] ARM: prepare and add colibri imx6ull 1gb (emmc) support

STALE1794d

Revision v1 of 4 in this series.

12 messages, 4 authors, 2021-09-13 · open the first message on its own page

[PATCH v1 0/7] ARM: prepare and add colibri imx6ull 1gb (emmc) support

From: Marcel Ziswiler <hidden>
Date: 2021-08-19 14:10:56 

From: Marcel Ziswiler <redacted>


Clean-up imx_v6_v7_defconfig and then add support for the new Colibri
iMX6ULL 1GB (eMMC) which builds on the success of the existing Colibri
iMX6ULL SKUs using raw NAND but replaces this by more RAM (1 GB) and an
eMMC (4 GB).


Marcel Ziswiler (6):
  ARM: imx_v6_v7_defconfig: enable mtd physmap
  ARM: imx_v6_v7_defconfig: enable fb
  ARM: imx_v6_v7_defconfig: change snd soc tlv320aic3x to i2c variant
  ARM: imx_v6_v7_defconfig: rebuild default configuration
  ARM: imx_v6_v7_defconfig: build imx sdma driver as module
  ARM: imx_v6_v7_defconfig: enable bpf syscall and cgroup bpf

Max Krummenacher (1):
  ARM: dts: colibri-imx6ull-emmc: add device trees

 arch/arm/boot/dts/Makefile                    |   1 +
 .../boot/dts/imx6ull-colibri-emmc-eval-v3.dts |  17 ++
 .../dts/imx6ull-colibri-emmc-nonwifi.dtsi     | 185 ++++++++++++++++++
 arch/arm/boot/dts/imx6ull-colibri.dtsi        |  30 ++-
 arch/arm/configs/imx_v6_v7_defconfig          |  46 ++---
 5 files changed, 249 insertions(+), 30 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts
 create mode 100644 arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi

-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 7/7] ARM: dts: colibri-imx6ull-emmc: add device trees

From: Marcel Ziswiler <hidden>
Date: 2021-08-19 14:10:14 

From: Max Krummenacher <redacted>

Add devices trees for a Colibri iMX6ULL 1GB which has a eMMC instead of
the raw NAND used on other SKUs.

Related-to: ELB-4056, ELB-4058
Signed-off-by: Max Krummenacher <redacted>
Signed-off-by: Marcel Ziswiler <redacted>

---

 arch/arm/boot/dts/Makefile                    |   1 +
 .../boot/dts/imx6ull-colibri-emmc-eval-v3.dts |  17 ++
 .../dts/imx6ull-colibri-emmc-nonwifi.dtsi     | 185 ++++++++++++++++++
 arch/arm/boot/dts/imx6ull-colibri.dtsi        |  30 ++-
 4 files changed, 232 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts
 create mode 100644 arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7e0934180724d..f88ddcc40b6ac 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -671,6 +671,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-tx6ul-0011.dtb \
 	imx6ul-tx6ul-mainboard.dtb \
 	imx6ull-14x14-evk.dtb \
+	imx6ull-colibri-emmc-eval-v3.dtb \
 	imx6ull-colibri-eval-v3.dtb \
 	imx6ull-colibri-wifi-eval-v3.dtb \
 	imx6ull-myir-mys-6ulx-eval.dtb \
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts
new file mode 100644
index 0000000000000..70104a6c5bac9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Toradex AG
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
+#include "imx6ull-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx6ull-emmc-eval",
+		     "toradex,colibri-imx6ull-emmc",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi
new file mode 100644
index 0000000000000..df055617e51f7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Toradex AG
+ */
+
+#include "imx6ull-colibri.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &usdhc2; /* eMMC */
+		mmc1 = &usdhc1; /* MMC 4bit slot */
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "SODIMM_8",
+			  "SODIMM_6",
+			  "SODIMM_129",
+			  "SODIMM_89",
+			  "SODIMM_19",
+			  "SODIMM_21",
+			  "UNUSABLE_SODIMM_180",
+			  "UNUSABLE_SODIMM_184",
+			  "SODIMM_4",
+			  "SODIMM_2",
+			  "SODIMM_106",
+			  "SODIMM_71",
+			  "SODIMM_23",
+			  "SODIMM_31",
+			  "SODIMM_99",
+			  "SODIMM_102",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_36",
+			  "SODIMM_38",
+			  "SODIMM_32",
+			  "SODIMM_34",
+			  "SODIMM_135",
+			  "SODIMM_77",
+			  "SODIMM_100",
+			  "SODIMM_186",
+			  "SODIMM_196",
+			  "SODIMM_194";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_55",
+			  "SODIMM_63",
+			  "SODIMM_178",
+			  "SODIMM_188",
+			  "SODIMM_73",
+			  "SODIMM_30",
+			  "SODIMM_67",
+			  "SODIMM_104",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_190",
+			  "SODIMM_47",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_29",
+			  "SODIMM_37",
+			  "SODIMM_88",
+			  "SODIMM_86",
+			  "SODIMM_92",
+			  "SODIMM_90";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_140",
+			  "SODIMM_59",
+			  "SODIMM_142",
+			  "SODIMM_144",
+			  "SODIMM_133",
+			  "SODIMM_146",
+			  "SODIMM_28",
+			  "SODIMM_75",
+			  "SODIMM_96",
+			  "SODIMM_81",
+			  "SODIMM_94",
+			  "SODIMM_101",
+			  "SODIMM_103",
+			  "SODIMM_79",
+			  "SODIMM_97",
+			  "SODIMM_69",
+			  "SODIMM_98",
+			  "SODIMM_85",
+			  "SODIMM_65";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_137",
+			  "SODIMM_95",
+			  "SODIMM_107",
+			  "SODIMM_131",
+			  "SODIMM_93",
+			  "",
+			  "SODIMM_138",
+			  "",
+			  "SODIMM_105",
+			  "SODIMM_127";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
+		&pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7
+		&pinctrl_gpmi_gpio>;
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2emmc>;
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+	bus-width = <8>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_module_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 0cdbf7b6e7285..f432fc0a6a530 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
- * Copyright 2018 Toradex AG
+ * Copyright 2018-2021 Toradex AG
  */
 
 #include "imx6ull.dtsi"
@@ -345,6 +345,19 @@ MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01	0xb0b0 /* SODIMM 63 */
 		>;
 	};
 
+		/*
+		 * With an eMMC instead of a raw NAND device the following pins
+		 * are available at SODIMM pins
+		 */
+		pinctrl_gpmi_gpio: gpmi-gpio-grp {
+			fsl,pins = <
+				MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x10b0 /* SODIMM 140 */
+				MX6UL_PAD_NAND_CE0_B__GPIO4_IO13	0x10b0 /* SODIMM 144 */
+				MX6UL_PAD_NAND_CLE__GPIO4_IO15		0x10b0 /* SODIMM 146 */
+				MX6UL_PAD_NAND_READY_B__GPIO4_IO12	0x10b0 /* SODIMM 142 */
+			>;
+		};
+
 	pinctrl_gpmi_nand: gpmi-nand-grp {
 		fsl,pins = <
 			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x100a9
@@ -533,6 +546,21 @@ MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT	0x10
 		>;
 	};
 
+		pinctrl_usdhc2emmc: usdhc2emmcgrp {
+			fsl,pins = <
+				MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
+				MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+				MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
+				MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
+				MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
+				MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
+			>;
+		};
+
 	pinctrl_wdog: wdog-grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 4/7] ARM: imx_v6_v7_defconfig: rebuild default configuration

From: Marcel Ziswiler <hidden>
Date: 2021-08-19 14:10:17 

From: Marcel Ziswiler <redacted>

Run "make imx_v6_v7_defconfig; make savedefconfig" to rebuild imx_v6_v7_defconfig.

This dropped the following nowadays obsolete configuration options:

CONFIG_MTD_M25P80=y (got integrated into MTD_SPI_NOR)
CONFIG_CS89x0=y (selected by CS89x0_PLATFORM)
CONFIG_SMSC_PHY=y (selected by USB_NET_SMSC95XX)
CONFIG_GPIO_MC9S08DZ60=y (depends on MACH_MX35_3DS)
CONFIG_REGULATOR=y (selected by various stuff)
CONFIG_MEDIA_CAMERA_SUPPORT=y (defaults to on if MEDIA_CAMERA)
CONFIG_MEDIA_CONTROLLER=y (selected by various stuff)
CONFIG_VIDEO_V4L2_SUBDEV_API=y (selected by various stuff)
CONFIG_SND_SOC_PHYCORE_AC97=y
CONFIG_SND_SOC_IMX_MC13783=y
CONFIG_USB_EHCI_MXC=y
CONFIG_USB_FSL_USB2=y

Signed-off-by: Marcel Ziswiler <redacted>
---

 arch/arm/configs/imx_v6_v7_defconfig | 38 ++++++++--------------------
 1 file changed, 11 insertions(+), 27 deletions(-)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 90d6a5cf254e0..21803cd2d1ba7 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -28,9 +28,6 @@ CONFIG_SOC_IMX6UL=y
 CONFIG_SOC_IMX7D=y
 CONFIG_SOC_IMX7ULP=y
 CONFIG_SOC_VF610=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_IMX6=y
 CONFIG_SMP=y
 CONFIG_ARM_PSCI=y
 CONFIG_HIGHMEM=y
@@ -58,7 +55,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -66,9 +62,6 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 CONFIG_NETFILTER=y
 CONFIG_CAN=y
 CONFIG_CAN_FLEXCAN=y
@@ -81,12 +74,14 @@ CONFIG_CFG80211_WEXT=y
 CONFIG_MAC80211=y
 CONFIG_RFKILL=y
 CONFIG_RFKILL_INPUT=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_IMX6=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 CONFIG_FW_LOADER_USER_HELPER=y
 CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
-CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_IMX_WEIM=y
 CONFIG_CONNECTOR=y
 CONFIG_MTD=y
@@ -100,14 +95,12 @@ CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_M25P80=y
 CONFIG_MTD_SST25L=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_GPMI_NAND=y
 CONFIG_MTD_NAND_VF610_NFC=y
 CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_SPI_NOR=y
-CONFIG_SPI_FSL_QUADSPI=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_MTD_UBI_BLOCK=y
@@ -118,6 +111,7 @@ CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
@@ -127,7 +121,6 @@ CONFIG_AHCI_IMX=y
 CONFIG_PATA_IMX=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
-CONFIG_CS89x0=y
 CONFIG_CS89x0_PLATFORM=y
 # CONFIG_NET_VENDOR_FARADAY is not set
 # CONFIG_NET_VENDOR_INTEL is not set
@@ -140,9 +133,8 @@ CONFIG_SMC91X=y
 CONFIG_SMC911X=y
 CONFIG_SMSC911X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
-CONFIG_AT803X_PHY=y
 CONFIG_MICREL_PHY=y
-CONFIG_SMSC_PHY=y
+CONFIG_AT803X_PHY=y
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_RTL8152=y
@@ -205,6 +197,7 @@ CONFIG_I2C_ALGOPCA=m
 CONFIG_I2C_GPIO=y
 CONFIG_I2C_IMX=y
 CONFIG_SPI=y
+CONFIG_SPI_FSL_QUADSPI=y
 CONFIG_SPI_GPIO=y
 CONFIG_SPI_IMX=y
 CONFIG_SPI_FSL_DSPI=y
@@ -213,14 +206,13 @@ CONFIG_PINCTRL_IMX8MN=y
 CONFIG_PINCTRL_IMX8MP=y
 CONFIG_PINCTRL_IMX8MQ=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_MXC=y
 CONFIG_GPIO_SIOX=m
 CONFIG_GPIO_MAX732X=y
-CONFIG_GPIO_MC9S08DZ60=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCF857X=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_74X164=y
-CONFIG_GPIO_MXC=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_POWER_RESET_SYSCON_POWEROFF=y
@@ -234,8 +226,8 @@ CONFIG_THERMAL_WRITABLE_TRIPS=y
 CONFIG_CPU_THERMAL=y
 CONFIG_IMX_THERMAL=y
 CONFIG_WATCHDOG=y
-CONFIG_DA9062_WATCHDOG=y
 CONFIG_DA9063_WATCHDOG=m
+CONFIG_DA9062_WATCHDOG=y
 CONFIG_RN5T618_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_IMX7ULP_WDT=y
@@ -246,7 +238,6 @@ CONFIG_MFD_MC13XXX_SPI=y
 CONFIG_MFD_MC13XXX_I2C=y
 CONFIG_MFD_RN5T618=y
 CONFIG_MFD_STMPE=y
-CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_ANATOP=y
 CONFIG_REGULATOR_DA9052=y
@@ -262,9 +253,6 @@ CONFIG_RC_CORE=y
 CONFIG_RC_DEVICES=y
 CONFIG_IR_GPIO_CIR=y
 CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_CONTROLLER=y
-CONFIG_VIDEO_V4L2_SUBDEV_API=y
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
@@ -272,7 +260,6 @@ CONFIG_VIDEO_MUX=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_CODA=m
 CONFIG_VIDEO_IMX_PXP=y
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
 CONFIG_VIDEO_ADV7180=m
 CONFIG_VIDEO_OV2680=m
 CONFIG_VIDEO_OV5640=m
@@ -308,12 +295,10 @@ CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_SOC=y
 CONFIG_SND_SOC_FSL_ASRC=y
 CONFIG_SND_IMX_SOC=y
-CONFIG_SND_SOC_PHYCORE_AC97=y
 CONFIG_SND_SOC_EUKREA_TLV320=y
 CONFIG_SND_SOC_IMX_ES8328=y
 CONFIG_SND_SOC_IMX_SGTL5000=y
 CONFIG_SND_SOC_IMX_SPDIF=y
-CONFIG_SND_SOC_IMX_MC13783=y
 CONFIG_SND_SOC_FSL_ASOC_CARD=y
 CONFIG_SND_SOC_AC97_CODEC=y
 CONFIG_SND_SOC_CS42XX8_I2C=y
@@ -325,7 +310,6 @@ CONFIG_HID_MULTITOUCH=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
 CONFIG_USB_ACM=m
 CONFIG_USB_STORAGE=y
 CONFIG_USB_CHIPIDEA=y
@@ -340,7 +324,6 @@ CONFIG_USB_EHSET_TEST_FIXTURE=m
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_MXS_PHY=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_FSL_USB2=y
 CONFIG_USB_CONFIGFS=y
 CONFIG_USB_CONFIGFS_SERIAL=y
 CONFIG_USB_CONFIGFS_ACM=y
@@ -389,11 +372,11 @@ CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_PCF8523=y
 CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_M41T80=y
+CONFIG_RTC_DRV_RC5T619=y
 CONFIG_RTC_DRV_DA9063=y
 CONFIG_RTC_DRV_MC13XXX=y
 CONFIG_RTC_DRV_MXC=y
 CONFIG_RTC_DRV_MXC_V2=y
-CONFIG_RTC_DRV_RC5T619=y
 CONFIG_RTC_DRV_SNVS=y
 CONFIG_DMADEVICES=y
 CONFIG_FSL_EDMA=y
@@ -470,13 +453,14 @@ CONFIG_CRC_CCITT=m
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC7=m
 CONFIG_LIBCRC32C=m
+CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_PRINTK_TIME=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_PROVE_LOCKING=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_FTRACE is not set
-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 5/7] ARM: imx_v6_v7_defconfig: build imx sdma driver as module

From: Marcel Ziswiler <hidden>
Date: 2021-08-19 14:10:19 

From: Marcel Ziswiler <redacted>

Build CONFIG_IMX_SDMA as module to avoid the following boot issue:

[    5.214751] imx-sdma 20ec000.sdma: Direct firmware load for
 imx/sdma/sdma-imx6q.bin failed with error -2
[    5.215762] imx-sdma 20ec000.sdma: Falling back to sysfs fallback
 for: imx/sdma/sdma-imx6q.bin

Signed-off-by: Marcel Ziswiler <redacted>
---

 arch/arm/configs/imx_v6_v7_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 21803cd2d1ba7..c0008b7faf2ce 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -380,7 +380,7 @@ CONFIG_RTC_DRV_MXC_V2=y
 CONFIG_RTC_DRV_SNVS=y
 CONFIG_DMADEVICES=y
 CONFIG_FSL_EDMA=y
-CONFIG_IMX_SDMA=y
+CONFIG_IMX_SDMA=m
 CONFIG_MXS_DMA=y
 CONFIG_DMATEST=m
 CONFIG_STAGING=y
-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 2/7] ARM: imx_v6_v7_defconfig: enable fb

From: Marcel Ziswiler <hidden>
Date: 2021-08-19 14:10:22 

From: Marcel Ziswiler <redacted>

Enable CONFIG_FB which is nowadays required for CONFIG_DRM_PANEL_LVDS,
CONFIG_DRM_PANEL_SIMPLE, CONFIG_DRM_PANEL_SEIKO_43WVF1G,
CONFIG_FB_MODE_HELPERS, CONFIG_BACKLIGHT_PWM, CONFIG_BACKLIGHT_GPIO,
CONFIG_FRAMEBUFFER_CONSOLE, CONFIG_LOGO, CONFIG_FONTS, CONFIG_FONT_8x8
and CONFIG_FONT_8x16.

Signed-off-by: Marcel Ziswiler <redacted>
---

 arch/arm/configs/imx_v6_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 70b3c377c4302..6618a009a105e 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -293,6 +293,7 @@ CONFIG_DRM_IMX_LDB=y
 CONFIG_DRM_IMX_HDMI=y
 CONFIG_DRM_ETNAVIV=y
 CONFIG_DRM_MXSFB=y
+CONFIG_FB=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 1/7] ARM: imx_v6_v7_defconfig: enable mtd physmap

From: Marcel Ziswiler <hidden>
Date: 2021-08-19 14:10:26 

From: Marcel Ziswiler <redacted>

Enable CONFIG_MTD_PHYSMAP which is nowadays required for CONFIG_MTD_PHYSMAP_OF.

Signed-off-by: Marcel Ziswiler <redacted>
---

 arch/arm/configs/imx_v6_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index ccee86d0045dd..70b3c377c4302 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -97,6 +97,7 @@ CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_M25P80=y
-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 3/7] ARM: imx_v6_v7_defconfig: change snd soc tlv320aic3x to i2c variant

From: Marcel Ziswiler <hidden>
Date: 2021-08-19 14:10:28 

From: Marcel Ziswiler <redacted>

Change CONFIG_SND_SOC_TLV320AIC3X to CONFIG_SND_SOC_TLV320AIC3X_I2C. I
did double check all current mainline device trees and they are all
using the I2C rather than the SPI variant.

Signed-off-by: Marcel Ziswiler <redacted>
---

 arch/arm/configs/imx_v6_v7_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 6618a009a105e..90d6a5cf254e0 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -317,7 +317,7 @@ CONFIG_SND_SOC_IMX_MC13783=y
 CONFIG_SND_SOC_FSL_ASOC_CARD=y
 CONFIG_SND_SOC_AC97_CODEC=y
 CONFIG_SND_SOC_CS42XX8_I2C=y
-CONFIG_SND_SOC_TLV320AIC3X=y
+CONFIG_SND_SOC_TLV320AIC3X_I2C=y
 CONFIG_SND_SOC_WM8960=y
 CONFIG_SND_SOC_WM8962=y
 CONFIG_SND_SIMPLE_CARD=y
-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 6/7] ARM: imx_v6_v7_defconfig: enable bpf syscall and cgroup bpf

From: Marcel Ziswiler <hidden>
Date: 2021-08-19 14:10:44 

From: Marcel Ziswiler <redacted>

Enable CONFIG_BPF_SYSCALL and CONFIG_CGROUP_BPF to allow for systemd
interoperability. This avoids the following failure on boot:

[   10.615914] systemd[1]: system-getty.slice: unit configures an IP
 firewall, but the local system does not support BPF/cgroup firewalling.

Signed-off-by: Marcel Ziswiler <redacted>
---

 arch/arm/configs/imx_v6_v7_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index c0008b7faf2ce..3e58c76763563 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -2,11 +2,13 @@ CONFIG_KERNEL_LZO=y
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BPF_SYSCALL=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_CGROUPS=y
+CONFIG_CGROUP_BPF=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 7/7] ARM: dts: colibri-imx6ull-emmc: add device trees

From: Marcel Ziswiler <hidden>
Date: 2021-08-19 16:24:44 

On Thu, 2021-08-19 at 16:03 +0200, Marcel Ziswiler wrote:
quoted hunk
From: Max Krummenacher <redacted>

Add devices trees for a Colibri iMX6ULL 1GB which has a eMMC instead of
the raw NAND used on other SKUs.

Related-to: ELB-4056, ELB-4058
Signed-off-by: Max Krummenacher <redacted>
Signed-off-by: Marcel Ziswiler <redacted>

---

 arch/arm/boot/dts/Makefile                    |   1 +
 .../boot/dts/imx6ull-colibri-emmc-eval-v3.dts |  17 ++
 .../dts/imx6ull-colibri-emmc-nonwifi.dtsi     | 185 ++++++++++++++++++
 arch/arm/boot/dts/imx6ull-colibri.dtsi        |  30 ++-
 4 files changed, 232 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts
 create mode 100644 arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi

...

diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 0cdbf7b6e7285..f432fc0a6a530 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
- * Copyright 2018 Toradex AG
+ * Copyright 2018-2021 Toradex AG
  */
 
 #include "imx6ull.dtsi"
@@ -345,6 +345,19 @@ MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01       0xb0b0 /* SODIMM 63 */
                >;
        };
 
+               /*
+                * With an eMMC instead of a raw NAND device the following pins
+                * are available at SODIMM pins
+                */
+               pinctrl_gpmi_gpio: gpmi-gpio-grp {
+                       fsl,pins = <
+                               MX6UL_PAD_NAND_ALE__GPIO4_IO10          0x10b0 /* SODIMM 140 */
+                               MX6UL_PAD_NAND_CE0_B__GPIO4_IO13        0x10b0 /* SODIMM 144 */
+                               MX6UL_PAD_NAND_CLE__GPIO4_IO15          0x10b0 /* SODIMM 146 */
+                               MX6UL_PAD_NAND_READY_B__GPIO4_IO12      0x10b0 /* SODIMM 142 */
+                       >;
+               };
+
Just noticed that I somehow messed up the indentation above with one spurious tab too much. Will correct that
in a v2. Sorry about that.
quoted hunk
        pinctrl_gpmi_nand: gpmi-nand-grp {
                fsl,pins = <
                        MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00   0x100a9
@@ -533,6 +546,21 @@ MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT       0x10
                >;
        };
 
+               pinctrl_usdhc2emmc: usdhc2emmcgrp {
+                       fsl,pins = <
+                               MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
+                               MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+                               MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+                               MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+                               MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+                               MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+                               MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
+                               MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
+                               MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
+                               MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
+                       >;
+               };
+
Ditto above.

        pinctrl_wdog: wdog-grp {
                fsl,pins = <
                        MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
Cheers

Marcel
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 2/7] ARM: imx_v6_v7_defconfig: enable fb

From: Fabio Estevam <festevam@gmail.com>
Date: 2021-08-26 19:03:47 

Hi Marcel,

On Thu, Aug 19, 2021 at 11:04 AM Marcel Ziswiler [off-list ref] wrote:
From: Marcel Ziswiler <redacted>

Enable CONFIG_FB which is nowadays required for CONFIG_DRM_PANEL_LVDS,
CONFIG_DRM_PANEL_SIMPLE, CONFIG_DRM_PANEL_SEIKO_43WVF1G,
CONFIG_FB_MODE_HELPERS, CONFIG_BACKLIGHT_PWM, CONFIG_BACKLIGHT_GPIO,
CONFIG_FRAMEBUFFER_CONSOLE, CONFIG_LOGO, CONFIG_FONTS, CONFIG_FONT_8x8
and CONFIG_FONT_8x16.

Signed-off-by: Marcel Ziswiler <redacted>
Yes, I noticed that I had no LCD output on an imx6ull-evk board and
after selecting CONFIG_FB it works again.

For the entire series:

Reviewed-by: Fabio Estevam <festevam@gmail.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 2/7] ARM: imx_v6_v7_defconfig: enable fb

From: Stefan Wahren <hidden>
Date: 2021-08-27 15:34:08 

Hi,

Am 26.08.21 um 21:03 schrieb Fabio Estevam:
Hi Marcel,

On Thu, Aug 19, 2021 at 11:04 AM Marcel Ziswiler [off-list ref] wrote:
quoted
From: Marcel Ziswiler <redacted>

Enable CONFIG_FB which is nowadays required for CONFIG_DRM_PANEL_LVDS,
CONFIG_DRM_PANEL_SIMPLE, CONFIG_DRM_PANEL_SEIKO_43WVF1G,
CONFIG_FB_MODE_HELPERS, CONFIG_BACKLIGHT_PWM, CONFIG_BACKLIGHT_GPIO,
CONFIG_FRAMEBUFFER_CONSOLE, CONFIG_LOGO, CONFIG_FONTS, CONFIG_FONT_8x8
and CONFIG_FONT_8x16.

Signed-off-by: Marcel Ziswiler <redacted>
Yes, I noticed that I had no LCD output on an imx6ull-evk board and
after selecting CONFIG_FB it works again.
this was caused by:

f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB")

Best regards

For the entire series:

Reviewed-by: Fabio Estevam <festevam@gmail.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 2/7] ARM: imx_v6_v7_defconfig: enable fb

From: Fabio Estevam <festevam@gmail.com>
Date: 2021-09-13 21:57:39 

On Fri, Aug 27, 2021 at 12:33 PM Stefan Wahren [off-list ref] wrote:
Hi,

Am 26.08.21 um 21:03 schrieb Fabio Estevam:
quoted
Hi Marcel,

On Thu, Aug 19, 2021 at 11:04 AM Marcel Ziswiler [off-list ref] wrote:
quoted
From: Marcel Ziswiler <redacted>

Enable CONFIG_FB which is nowadays required for CONFIG_DRM_PANEL_LVDS,
CONFIG_DRM_PANEL_SIMPLE, CONFIG_DRM_PANEL_SEIKO_43WVF1G,
CONFIG_FB_MODE_HELPERS, CONFIG_BACKLIGHT_PWM, CONFIG_BACKLIGHT_GPIO,
CONFIG_FRAMEBUFFER_CONSOLE, CONFIG_LOGO, CONFIG_FONTS, CONFIG_FONT_8x8
and CONFIG_FONT_8x16.

Signed-off-by: Marcel Ziswiler <redacted>
Yes, I noticed that I had no LCD output on an imx6ull-evk board and
after selecting CONFIG_FB it works again.
this was caused by:

f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB")
Thanks, Stefan.

Marcel, I think you could resend this one with the Fixes tag and
hopefully it could be applied as a fix for 5.14-rc.

We can consider it as a regression fix, because it restores display
support on many i.MX boards on 5.14-rc.

Thanks

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help