Re: [PATCHv3 6/6] phy: amlogic: meson8b-usb2: don't log an error on -EPROBE_DEFER

[PATCHv3 0/6] Meson-8b and Meson-gxbb Fix some missing code · Anand Moon <hidden> · 2021-08-17
[PATCHv3 1/6] ARM: dts: meson8b: odroidc1: Add usb phy power node · Anand Moon <hidden> · 2021-08-17
Re: [PATCHv3 1/6] ARM: dts: meson8b: odroidc1: Add usb phy power node · Martin Blumenstingl <martin.blumenstingl@googlemail.com> · 2021-08-28
Re: [PATCHv3 1/6] ARM: dts: meson8b: odroidc1: Add usb phy power node · Neil Armstrong <hidden> · 2021-08-30
Re: [PATCHv3 1/6] ARM: dts: meson8b: odroidc1: Add usb phy power node · Martin Blumenstingl <martin.blumenstingl@googlemail.com> · 2021-08-30
Re: [PATCHv3 1/6] ARM: dts: meson8b: odroidc1: Add usb phy power node · Neil Armstrong <hidden> · 2021-08-31
Re: [PATCHv3 1/6] ARM: dts: meson8b: odroidc1: Add usb phy power node · Anand Moon <hidden> · 2021-08-31
Re: [PATCHv3 1/6] ARM: dts: meson8b: odroidc1: Add usb phy power node · Martin Blumenstingl <martin.blumenstingl@googlemail.com> · 2021-09-21
Re: [PATCHv3 1/6] ARM: dts: meson8b: odroidc1: Add usb phy power node · Anand Moon <hidden> · 2021-09-25
[PATCHv3 2/6] ARM: dts: meson8b: odroidc1: Set usb power source to always on · Anand Moon <hidden> · 2021-08-17
Re: [PATCHv3 2/6] ARM: dts: meson8b: odroidc1: Set usb power source to always on · Martin Blumenstingl <martin.blumenstingl@googlemail.com> · 2021-08-28
[PATCHv3 3/6] arm64: dts: amlogic: odroidc2: Fix the chip enable signal for usb power · Anand Moon <hidden> · 2021-08-17
Re: [PATCHv3 3/6] arm64: dts: amlogic: odroidc2: Fix the chip enable signal for usb power · Martin Blumenstingl <martin.blumenstingl@googlemail.com> · 2021-08-28
[PATCHv3 4/6] arm64: dts: amlogic: odroidc2: use vbus-supply for power source for usb nodes · Anand Moon <hidden> · 2021-08-17
Re: [PATCHv3 4/6] arm64: dts: amlogic: odroidc2: use vbus-supply for power source for usb nodes · Martin Blumenstingl <martin.blumenstingl@googlemail.com> · 2021-08-28
[PATCHv3 5/6] phy: amlogic: meson8b-usb2: Power off the PHY by putting it into reset mode · Anand Moon <hidden> · 2021-08-17
Re: [PATCHv3 5/6] phy: amlogic: meson8b-usb2: Power off the PHY by putting it into reset mode · Vinod Koul <vkoul@kernel.org> · 2021-08-17
[PATCHv3 6/6] phy: amlogic: meson8b-usb2: don't log an error on -EPROBE_DEFER · Anand Moon <hidden> · 2021-08-17
Re: [PATCHv3 6/6] phy: amlogic: meson8b-usb2: don't log an error on -EPROBE_DEFER · Vinod Koul <vkoul@kernel.org> · 2021-08-17

From: Vinod Koul <vkoul@kernel.org>
Date: 2021-08-17 10:31:15
Also in: linux-amlogic, linux-devicetree, linux-phy, lkml

On 17-08-21, 09:45, Anand Moon wrote:

devm_phy_create can return -EPROBE_DEFER if the vbus-supply is not ready
yet. Silence this warning as the driver framework will re-attempt
registering the PHY. Use dev_err_probe() for phy resources to indicate
the deferral reason when waiting for the resource to come up.

Applied, thanks

-- 
~Vinod

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help