[PATCHv3 3/6] arm64: dts: amlogic: odroidc2: Fix the chip enable signal for usb power
flat view
STALE1854d
From: Anand Moon <hidden>
Date: 2021-08-17 04:18:03
Also in:
linux-amlogic, linux-devicetree, linux-phy, lkml
Subsystem:
arm/amlogic meson soc support, the rest · Maintainers:
Neil Armstrong, Kevin Hilman, Linus Torvalds
Revision v3 of 3 in this series.
Revisions (3)
- v1 [diff vs current]
- v2 [diff vs current]
- v3 current
Fix the chip enable signal changing from Active High to Active Low
to enable input power to USB power. Also updated signal name as per
the schematics.
Fixes: 5a0803bd5ae2 ("ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes")
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <redacted>
---
v2:
Fix the typo: shematics -> schematics
---
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 201596247fd9..3f4f16a5dedd 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts@@ -38,12 +38,11 @@ usb_otg_pwr: regulator-usb-pwrs { regulator-max-microvolt = <5000000>; /* - * signal name from schematics: PWREN + * signal name from schematics: PWREN - GPIOAO.BIT5 */ - gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; - enable-active-high; + gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_LOW>; /* - * signal name from schematics: USB_POWER + * signal name from schematics: USB_POWER - P5V0 */ vin-supply = <&p5v0>; };
--
2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel