Re: [PATCH v2 3/3] drm/panel: Add ilitek ili9341 panel driver
From: Jagan Teki <jagan@amarulasolutions.com>
Date: 2021-07-22 07:58:31
Also in:
dri-devel, linux-devicetree, lkml
Hi Dillon, On Thu, Jul 22, 2021 at 4:38 AM Dillon Min [off-list ref] wrote:
Hi Jagan Thanks for your time to review my code. On Wed, 21 Jul 2021 at 23:48, Jagan Teki [off-list ref] wrote:quoted
On Wed, Jul 21, 2021 at 1:11 PM [off-list ref] wrote:quoted
From: Dillon Min <redacted> This driver combine tiny/ili9341.c mipi_dbi_interface driver with mipi_dpi_interface driver, can support ili9341 with serial mode or parallel rgb interface mode by register configuration. Cc: Linus Walleij <redacted> Signed-off-by: Dillon Min <redacted> --- changes in v2: - replace vcc regulator to three bulk regulators(vci, vddi, vddi-led) according to linus suggestion, thanks. drivers/gpu/drm/panel/Kconfig | 12 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 778 +++++++++++++++++++++++++++ 3 files changed, 791 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9341.cdiff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index ef87d92cdf49..eb34b8d1b19a 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig@@ -124,6 +124,18 @@ config DRM_PANEL_ILITEK_IL9322 Say Y here if you want to enable support for Ilitek IL9322 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. +config DRM_PANEL_ILITEK_ILI9341 + tristate "Ilitek ILI9341 240x320 QVGA panels" + depends on OF && SPI + depends on DRM_KMS_HELPER + depends on DRM_KMS_CMA_HELPER + depends on BACKLIGHT_CLASS_DEVICE + select DRM_MIPI_DBI + help + Say Y here if you want to enable support for Ilitek IL9341 + QVGA (240x320) RGB panels. support serial & parallel rgb + interface. + config DRM_PANEL_ILITEK_ILI9881C tristate "Ilitek ILI9881C-based panels" depends on OFdiff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index cae4d976c069..0ecde184665d 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile@@ -11,6 +11,7 @@ obj-$(CONFIG_DRM_PANEL_ELIDA_KD35T133) += panel-elida-kd35t133.o obj-$(CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02) += panel-feixin-k101-im2ba02.o obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o +obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9341) += panel-ilitek-ili9341.o obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.odiff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9341.c b/drivers/gpu/drm/panel/panel-ilitek-ili9341.c new file mode 100644 index 000000000000..717b0b930e2f --- /dev/null +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9341.c@@ -0,0 +1,778 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Ilitek ILI9341 TFT LCD drm_panel driver. + * + * This panel can be configured to support: + * - 16-bit parallel RGB interface + * - 18-bit parallel RGB interface + * - 4-line serial spi interface + * + * Copyright (C) 2021 Dillon Min <dillon.minfei@gmail.com> + * Derived from drivers/drm/gpu/panel/panel-ilitek-ili9322.c + * the reuse of DBI abstraction part referred from Linus's patch + * "drm/panel: s6e63m0: Switch to DBI abstraction for SPI" + */ + +#include <linux/bitops.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regulator/consumer.h> +#include <linux/spi/spi.h> +#include <linux/delay.h> +#include <video/mipi_display.h> +#include <drm/drm_mipi_dbi.h> +#include <drm/drm_gem_framebuffer_helper.h> +#include <drm/drm_gem_cma_helper.h> +#include <drm/drm_fb_helper.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_gem_atomic_helper.h> + +#include <drm/drm_drv.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> +#include <drm/drm_print.h> + +#define ILI9341_RGB_INTERFACE 0xb0 /* RGB Interface Signal Control */ +#define ILI9341_FRC 0xb1 /* Frame Rate Control register */ +#define ILI9341_DFC 0xb6 /* Display Function Control register */ +#define ILI9341_POWER1 0xc0 /* Power Control 1 register */ +#define ILI9341_POWER2 0xc1 /* Power Control 2 register */ +#define ILI9341_VCOM1 0xc5 /* VCOM Control 1 register */ +#define ILI9341_VCOM2 0xc7 /* VCOM Control 2 register */ +#define ILI9341_POWERA 0xcb /* Power control A register */ +#define ILI9341_POWERB 0xcf /* Power control B register */ +#define ILI9341_PGAMMA 0xe0 /* Positive Gamma Correction register */ +#define ILI9341_NGAMMA 0xe1 /* Negative Gamma Correction register */ +#define ILI9341_DTCA 0xe8 /* Driver timing control A */ +#define ILI9341_DTCB 0xea /* Driver timing control B */ +#define ILI9341_POWER_SEQ 0xed /* Power on sequence register */ +#define ILI9341_3GAMMA_EN 0xf2 /* 3 Gamma enable register */ +#define ILI9341_INTERFACE 0xf6 /* Interface control register */ +#define ILI9341_PRC 0xf7 /* Pump ratio control register */ +#define ILI9341_ETMOD 0xb7 /* Entry mode set */ + +#define ILI9341_MADCTL_BGR BIT(3) +#define ILI9341_MADCTL_MV BIT(5) +#define ILI9341_MADCTL_MX BIT(6) +#define ILI9341_MADCTL_MY BIT(7) + +#define ILI9341_POWER_B_LEN 3 +#define ILI9341_POWER_SEQ_LEN 4 +#define ILI9341_DTCA_LEN 3 +#define ILI9341_DTCB_LEN 2 +#define ILI9341_POWER_A_LEN 5 +#define ILI9341_DFC_1_LEN 2 +#define ILI9341_FRC_LEN 2 +#define ILI9341_VCOM_1_LEN 2 +#define ILI9341_DFC_2_LEN 4 +#define ILI9341_COLUMN_ADDR_LEN 4 +#define ILI9341_PAGE_ADDR_LEN 4 +#define ILI9341_INTERFACE_LEN 3 +#define ILI9341_PGAMMA_LEN 15 +#define ILI9341_NGAMMA_LEN 15 +#define ILI9341_CA_LEN 3 + +#define ILI9341_PIXEL_DPI_16_BITS (BIT(6) | BIT(4)) +#define ILI9341_PIXEL_DPI_18_BITS (BIT(6) | BIT(5)) +#define ILI9341_GAMMA_CURVE_1 BIT(0) +#define ILI9341_IF_WE_MODE BIT(0) +#define ILI9341_IF_BIG_ENDIAN 0x00 +#define ILI9341_IF_DM_RGB BIT(2) +#define ILI9341_IF_DM_INTERNAL 0x00 +#define ILI9341_IF_DM_VSYNC BIT(3) +#define ILI9341_IF_RM_RGB BIT(1) +#define ILI9341_IF_RIM_RGB 0x00 + +#define ILI9341_COLUMN_ADDR 0x00ef +#define ILI9341_PAGE_ADDR 0x013f + +#define ILI9341_RGB_EPL BIT(0) +#define ILI9341_RGB_DPL BIT(1) +#define ILI9341_RGB_HSPL BIT(2) +#define ILI9341_RGB_VSPL BIT(3) +#define ILI9341_RGB_DE_MODE BIT(6) +#define ILI9341_RGB_DISP_PATH_MEM BIT(7) + +#define ILI9341_DBI_VCOMH_4P6V 0x23 +#define ILI9341_DBI_PWR_2_DEFAULT 0x10 +#define ILI9341_DBI_PRC_NORMAL 0x20 +#define ILI9341_DBI_VCOM_1_VMH_4P25V 0x3e +#define ILI9341_DBI_VCOM_1_VML_1P5V 0x28 +#define ILI9341_DBI_VCOM_2_DEC_58 0x86 +#define ILI9341_DBI_FRC_DIVA 0x00 +#define ILI9341_DBI_FRC_RTNA 0x1b +#define ILI9341_DBI_EMS_GAS BIT(0) +#define ILI9341_DBI_EMS_DTS BIT(1) +#define ILI9341_DBI_EMS_GON BIT(2) + +/** + * struct ili9341_config - the system specific ILI9341 configuration + * @max_spi_speed: 10000000 + */ +struct ili9341_config { + u32 max_spi_speed; + /** @mode: the drm display mode */ + const struct drm_display_mode mode; + /** @ca: TODO: need comments for this register */ + u8 ca[ILI9341_CA_LEN]; + /** @power_b: TODO: need comments for this register */ + u8 power_b[ILI9341_POWER_B_LEN]; + /** @power_seq: TODO: need comments for this register */ + u8 power_seq[ILI9341_POWER_SEQ_LEN]; + /** @dtca: TODO: need comments for this register */ + u8 dtca[ILI9341_DTCA_LEN]; + /** @dtcb: TODO: need comments for this register */ + u8 dtcb[ILI9341_DTCB_LEN]; + /** @power_a: TODO: need comments for this register */ + u8 power_a[ILI9341_POWER_A_LEN]; + /** @frc: Frame Rate Control (In Normal Mode/Full Colors) (B1h) */ + u8 frc[ILI9341_FRC_LEN]; + /** @prc: TODO: need comments for this register */ + u8 prc; + /** @dfc_1: B6h DISCTRL (Display Function Control) */ + u8 dfc_1[ILI9341_DFC_1_LEN]; + /** @power_1: Power Control 1 (C0h) */ + u8 power_1; + /** @power_2: Power Control 2 (C1h) */ + u8 power_2; + /** @vcom_1: VCOM Control 1(C5h) */ + u8 vcom_1[ILI9341_VCOM_1_LEN]; + /** @vcom_2: VCOM Control 2(C7h) */ + u8 vcom_2; + /** @address_mode: Memory Access Control (36h) */ + u8 address_mode; + /** @g3amma_en: TODO: need comments for this register */ + u8 g3amma_en; + /** @rgb_interface: RGB Interface Signal Control (B0h) */ + u8 rgb_interface; + /** @dfc_2: refer to dfc_1 */ + u8 dfc_2[ILI9341_DFC_2_LEN]; + /** @column_addr: Column Address Set (2Ah) */ + u8 column_addr[ILI9341_COLUMN_ADDR_LEN]; + /** @page_addr: Page Address Set (2Bh) */ + u8 page_addr[ILI9341_PAGE_ADDR_LEN]; + /** @interface: Interface Control (F6h) */ + u8 interface[ILI9341_INTERFACE_LEN]; + /** @pixel_format: This command sets the pixel format for the RGB */ + /* image data used by + */ + u8 pixel_format; + /** @gamma_curve: This command is used to select the desired Gamma */ + /* curve for the + */ + u8 gamma_curve; + /** @pgamma: Positive Gamma Correction (E0h) */ + u8 pgamma[ILI9341_PGAMMA_LEN]; + /** @ngamma: Negative Gamma Correction (E1h) */ + u8 ngamma[ILI9341_NGAMMA_LEN]; +}; + +struct ili9341 { + struct device *dev; + const struct ili9341_config *conf; + struct drm_panel panel; + struct gpio_desc *reset_gpio; + struct gpio_desc *dc_gpio; + struct mipi_dbi *dbi; + u32 max_spi_speed; + struct regulator_bulk_data supplies[3]; +}; + +/* + * The Stm32f429-disco board has a panel ili9341 connected to ltdc controller + */ +static const struct ili9341_config ili9341_stm32f429_disco_data = { + .max_spi_speed = 10000000, + .mode = { + .clock = 6100, + .hdisplay = 240, + .hsync_start = 240 + 10,/* hfp 10 */ + .hsync_end = 240 + 10 + 10,/* hsync 10 */ + .htotal = 240 + 10 + 10 + 20,/* hbp 20 */ + .vdisplay = 320, + .vsync_start = 320 + 4,/* vfp 4 */ + .vsync_end = 320 + 4 + 2,/* vsync 2 */ + .vtotal = 320 + 4 + 2 + 2,/* vbp 2 */ + .flags = 0, + .width_mm = 65, + .height_mm = 50, + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, + }, + .ca = {0xc3, 0x08, 0x50}, + .power_b = {0x00, 0xc1, 0x30}, + .power_seq = {0x64, 0x03, 0x12, 0x81}, + .dtca = {0x85, 0x00, 0x78}, + .power_a = {0x39, 0x2c, 0x00, 0x34, 0x02}, + .prc = 0x20, + .dtcb = {0x00, 0x00}, + /* 0x00 fosc, 0x1b 70hz */ + .frc = {0x00, 0x1b}, + /* 0x0a Interval scan, AGND AGND AGND AGND + * 0xa2 Normally white, G1 -> G320, S720 -> S1, + * Scan Cycle 5 frames,85ms + */ + .dfc_1 = {0x0a, 0xa2}, + /* 0x10 3.65v */ + .power_1 = 0x10, + /* 0x10 AVDD=vci*2, VGH=vci*7, VGL=-vci*4 */ + .power_2 = 0x10, + /* 0x45 VCOMH 4.425v, 0x15 VCOML -1.975*/ + .vcom_1 = {0x45, 0x15}, + /* 0x90 offset voltage, VMH-48, VML-48 */ + .vcom_2 = 0x90, + /* 0xc8 Row Address Order, Column Address Order + * BGR 1 + */ + .address_mode = 0xc8, + .g3amma_en = 0x00, + /* 0xc2 + * Display Data Path: Memory + * RGB: DE mode + * DOTCLK polarity set (data fetched at the falling time) + */ + .rgb_interface = ILI9341_RGB_DISP_PATH_MEM | + ILI9341_RGB_DE_MODE | + ILI9341_RGB_DPL, + /* + * 0x0a + * Gate outputs in non-display area: Interval scan + * Determine source/VCOM output in a non-display area in the partial + * display mode: AGND AGND AGND AGND + * + * 0xa7 + * Scan Cycle: 15 frames + * fFLM = 60Hz: 255ms + * Liquid crystal type: Normally white + * Gate Output Scan Direction: G1 -> G320 + * Source Output Scan Direction: S720 -> S1 + * + * 0x27 + * LCD Driver Line: 320 lines + * + * 0x04 + * PCDIV: 4 + */ + .dfc_2 = {0x0a, 0xa7, 0x27, 0x04}, + /* column address: 240 */ + .column_addr = {0x00, 0x00, (ILI9341_COLUMN_ADDR >> 4) & 0xff, + ILI9341_COLUMN_ADDR & 0xff}, + /* page address: 320 */ + .page_addr = {0x00, 0x00, (ILI9341_PAGE_ADDR >> 4) & 0xff, + ILI9341_PAGE_ADDR & 0xff}, + /* Memory write control: When the transfer number of data exceeds + * (EC-SC+1)*(EP-SP+1), the column and page number will be + * reset, and the exceeding data will be written into the following + * column and page. + * Display Operation Mode: RGB Interface Mode + * Interface for RAM Access: RGB interface + * 16- bit RGB interface (1 transfer/pixel) + */ + .interface = {ILI9341_IF_WE_MODE, 0x00, + ILI9341_IF_DM_RGB | ILI9341_IF_RM_RGB}, + /* DPI: 16 bits / pixel */ + .pixel_format = ILI9341_PIXEL_DPI_16_BITS, + /* Curve Selected: Gamma curve 1 (G2.2) */ + .gamma_curve = ILI9341_GAMMA_CURVE_1, + .pgamma = {0x0f, 0x29, 0x24, 0x0c, 0x0e, + 0x09, 0x4e, 0x78, 0x3c, 0x09, + 0x13, 0x05, 0x17, 0x11, 0x00}, + .ngamma = {0x00, 0x16, 0x1b, 0x04, 0x11, + 0x07, 0x31, 0x33, 0x42, 0x05, + 0x0c, 0x0a, 0x28, 0x2f, 0x0f}, +}; + +static inline struct ili9341 *panel_to_ili9341(struct drm_panel *panel) +{ + return container_of(panel, struct ili9341, panel); +} + +static void ili9341_dpi_init(struct ili9341 *ili) +{ + struct mipi_dbi *dbi = ili->dbi; + struct ili9341_config *cfg = (struct ili9341_config *)ili->conf; + + /* Power Control */ + mipi_dbi_command_stackbuf(dbi, 0xca, cfg->ca, ILI9341_CA_LEN); + mipi_dbi_command_stackbuf(dbi, ILI9341_POWERB, cfg->power_b, + ILI9341_POWER_B_LEN); + mipi_dbi_command_stackbuf(dbi, ILI9341_POWER_SEQ, cfg->power_seq, + ILI9341_POWER_SEQ_LEN); + mipi_dbi_command_stackbuf(dbi, ILI9341_DTCA, cfg->dtca, + ILI9341_DTCA_LEN); + mipi_dbi_command_stackbuf(dbi, ILI9341_POWERA, cfg->power_a, + ILI9341_POWER_A_LEN); + mipi_dbi_command(ili->dbi, ILI9341_PRC, cfg->prc); + mipi_dbi_command_stackbuf(dbi, ILI9341_DTCB, cfg->dtcb, + ILI9341_DTCB_LEN); + mipi_dbi_command_stackbuf(dbi, ILI9341_FRC, cfg->frc, ILI9341_FRC_LEN); + mipi_dbi_command_stackbuf(dbi, ILI9341_DFC, cfg->dfc_1, + ILI9341_DFC_1_LEN); + mipi_dbi_command(dbi, ILI9341_POWER1, cfg->power_1); + mipi_dbi_command(dbi, ILI9341_POWER2, cfg->power_2); + + /* VCOM */ + mipi_dbi_command_stackbuf(dbi, ILI9341_VCOM1, cfg->vcom_1, + ILI9341_VCOM_1_LEN); + mipi_dbi_command(dbi, ILI9341_VCOM2, cfg->vcom_2); + mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, cfg->address_mode); + + /* Gamma */ + mipi_dbi_command(dbi, ILI9341_3GAMMA_EN, cfg->g3amma_en); + mipi_dbi_command(dbi, ILI9341_RGB_INTERFACE, cfg->rgb_interface); + mipi_dbi_command_stackbuf(dbi, ILI9341_DFC, cfg->dfc_2, + ILI9341_DFC_2_LEN); + + /* Colomn address set */ + mipi_dbi_command_stackbuf(dbi, MIPI_DCS_SET_COLUMN_ADDRESS, + cfg->column_addr, ILI9341_COLUMN_ADDR_LEN); + + /* Page address set */ + mipi_dbi_command_stackbuf(dbi, MIPI_DCS_SET_PAGE_ADDRESS, + cfg->page_addr, ILI9341_PAGE_ADDR_LEN); + mipi_dbi_command_stackbuf(dbi, ILI9341_INTERFACE, cfg->interface, + ILI9341_INTERFACE_LEN); + + /* Format */ + mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT, cfg->pixel_format); + mipi_dbi_command(dbi, MIPI_DCS_WRITE_MEMORY_START); + msleep(200); + mipi_dbi_command(dbi, MIPI_DCS_SET_GAMMA_CURVE, cfg->gamma_curve); + mipi_dbi_command_stackbuf(dbi, ILI9341_PGAMMA, cfg->pgamma, + ILI9341_PGAMMA_LEN); + mipi_dbi_command_stackbuf(dbi, ILI9341_NGAMMA, cfg->ngamma, + ILI9341_NGAMMA_LEN); + mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE); + msleep(200); + mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON); + mipi_dbi_command(dbi, MIPI_DCS_WRITE_MEMORY_START); + + dev_info(ili->dev, "initialized display rgb interface\n"); +} + +static int ili9341_dpi_power_on(struct ili9341 *ili) +{ + int ret = 0; + + /* Assert RESET */ + gpiod_set_value(ili->reset_gpio, 1); + + /* Enable power */ + ret = regulator_bulk_enable(ARRAY_SIZE(ili->supplies), + ili->supplies); + if (ret < 0) { + dev_err(ili->dev, "unable to enable vcc\n"); + return ret; + } + msleep(20); + + /* De-assert RESET */ + gpiod_set_value(ili->reset_gpio, 0); + msleep(20); + + return 0; +} + +static int ili9341_dpi_power_off(struct ili9341 *ili) +{ + /* Assert RESET */ + gpiod_set_value(ili->reset_gpio, 1); + + /* Disable power */ + return regulator_bulk_disable(ARRAY_SIZE(ili->supplies), + ili->supplies); +} + +static int ili9341_dpi_disable(struct drm_panel *panel) +{ + struct ili9341 *ili = panel_to_ili9341(panel); + + mipi_dbi_command(ili->dbi, MIPI_DCS_SET_DISPLAY_OFF); + return 0; +} + +static int ili9341_dpi_unprepare(struct drm_panel *panel) +{ + struct ili9341 *ili = panel_to_ili9341(panel); + + return ili9341_dpi_power_off(ili); +} + +static int ili9341_dpi_prepare(struct drm_panel *panel) +{ + struct ili9341 *ili = panel_to_ili9341(panel); + int ret; + + ret = ili9341_dpi_power_on(ili); + if (ret < 0) + return ret; + + ili9341_dpi_init(ili); + + return ret; +} + +static int ili9341_dpi_enable(struct drm_panel *panel) +{ + struct ili9341 *ili = panel_to_ili9341(panel); + + mipi_dbi_command(ili->dbi, MIPI_DCS_SET_DISPLAY_ON); + return 0; +} + +static int ili9341_dpi_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct ili9341 *ili = panel_to_ili9341(panel); + struct drm_device *drm = connector->dev; + struct drm_display_mode *mode; + struct drm_display_info *info; + + info = &connector->display_info; + info->width_mm = ili->conf->mode.width_mm; + info->height_mm = ili->conf->mode.height_mm; + + if (ili->conf->rgb_interface & ILI9341_RGB_DPL) + info->bus_flags |= DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE; + else + info->bus_flags |= DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE; + + if (ili->conf->rgb_interface & ILI9341_RGB_EPL) + info->bus_flags |= DRM_BUS_FLAG_DE_LOW; + else + info->bus_flags |= DRM_BUS_FLAG_DE_HIGH; + + mode = drm_mode_duplicate(drm, &ili->conf->mode); + if (!mode) { + DRM_ERROR("bad mode or failed to add mode\n"); + return -EINVAL; + } + drm_mode_set_name(mode); + + /* Set up the polarity */ + if (ili->conf->rgb_interface & ILI9341_RGB_HSPL) + mode->flags |= DRM_MODE_FLAG_PHSYNC; + else + mode->flags |= DRM_MODE_FLAG_NHSYNC; + + if (ili->conf->rgb_interface & ILI9341_RGB_VSPL) + mode->flags |= DRM_MODE_FLAG_PVSYNC; + else + mode->flags |= DRM_MODE_FLAG_NVSYNC; + + drm_mode_probed_add(connector, mode); + + return 1; /* Number of modes */ +} + +static const struct drm_panel_funcs ili9341_dpi_funcs = { + .disable = ili9341_dpi_disable, + .unprepare = ili9341_dpi_unprepare, + .prepare = ili9341_dpi_prepare, + .enable = ili9341_dpi_enable, + .get_modes = ili9341_dpi_get_modes, +}; + +static void ili9341_dbi_enable(struct drm_simple_display_pipe *pipe, + struct drm_crtc_state *crtc_state, + struct drm_plane_state *plane_state) +{ + struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev); + struct mipi_dbi *dbi = &dbidev->dbi; + u8 addr_mode; + int ret, idx; + + if (!drm_dev_enter(pipe->crtc.dev, &idx)) + return; + + DRM_DEBUG_KMS("\n"); + + ret = mipi_dbi_poweron_conditional_reset(dbidev); + if (ret < 0) + goto out_exit; + if (ret == 1) + goto out_enable; + + mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_OFF); + + mipi_dbi_command(dbi, ILI9341_POWERB, 0x00, 0xc1, 0x30); + mipi_dbi_command(dbi, ILI9341_POWER_SEQ, 0x64, 0x03, 0x12, 0x81); + mipi_dbi_command(dbi, ILI9341_DTCA, 0x85, 0x00, 0x78); + mipi_dbi_command(dbi, ILI9341_POWERA, 0x39, 0x2c, 0x00, 0x34, 0x02); + mipi_dbi_command(dbi, ILI9341_PRC, ILI9341_DBI_PRC_NORMAL); + mipi_dbi_command(dbi, ILI9341_DTCB, 0x00, 0x00); + + /* Power Control */ + mipi_dbi_command(dbi, ILI9341_POWER1, ILI9341_DBI_VCOMH_4P6V); + mipi_dbi_command(dbi, ILI9341_POWER2, ILI9341_DBI_PWR_2_DEFAULT); + /* VCOM */ + mipi_dbi_command(dbi, ILI9341_VCOM1, ILI9341_DBI_VCOM_1_VMH_4P25V, + ILI9341_DBI_VCOM_1_VML_1P5V); + mipi_dbi_command(dbi, ILI9341_VCOM2, ILI9341_DBI_VCOM_2_DEC_58); + + /* Memory Access Control */ + mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT, + MIPI_DCS_PIXEL_FMT_16BIT); + + /* Frame Rate */ + mipi_dbi_command(dbi, ILI9341_FRC, ILI9341_DBI_FRC_DIVA & 0x03, + ILI9341_DBI_FRC_RTNA & 0x1f); + + /* Gamma */ + mipi_dbi_command(dbi, ILI9341_3GAMMA_EN, 0x00); + mipi_dbi_command(dbi, MIPI_DCS_SET_GAMMA_CURVE, ILI9341_GAMMA_CURVE_1); + mipi_dbi_command(dbi, ILI9341_PGAMMA, + 0x0f, 0x31, 0x2b, 0x0c, 0x0e, 0x08, 0x4e, 0xf1, + 0x37, 0x07, 0x10, 0x03, 0x0e, 0x09, 0x00); + mipi_dbi_command(dbi, ILI9341_NGAMMA, + 0x00, 0x0e, 0x14, 0x03, 0x11, 0x07, 0x31, 0xc1, + 0x48, 0x08, 0x0f, 0x0c, 0x31, 0x36, 0x0f); + + /* DDRAM */ + mipi_dbi_command(dbi, ILI9341_ETMOD, ILI9341_DBI_EMS_GAS | + ILI9341_DBI_EMS_DTS | + ILI9341_DBI_EMS_GON); + + /* Display */ + mipi_dbi_command(dbi, ILI9341_DFC, 0x08, 0x82, 0x27, 0x00); + mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE); + msleep(100); + + mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON); + msleep(100); + +out_enable: + switch (dbidev->rotation) { + default: + addr_mode = ILI9341_MADCTL_MX; + break; + case 90: + addr_mode = ILI9341_MADCTL_MV; + break; + case 180: + addr_mode = ILI9341_MADCTL_MY; + break; + case 270: + addr_mode = ILI9341_MADCTL_MV | ILI9341_MADCTL_MY | + ILI9341_MADCTL_MX; + break; + } + addr_mode |= ILI9341_MADCTL_BGR; + mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode); + mipi_dbi_enable_flush(dbidev, crtc_state, plane_state); + DRM_DEBUG_KMS("initialized display serial interface\n"); +out_exit: + drm_dev_exit(idx); +} + +static const struct drm_simple_display_pipe_funcs ili9341_dbi_funcs = { + .enable = ili9341_dbi_enable, + .disable = mipi_dbi_pipe_disable, + .update = mipi_dbi_pipe_update, + .prepare_fb = drm_gem_simple_display_pipe_prepare_fb, +}; + +static const struct drm_display_mode ili9341_dbi_mode = { + DRM_SIMPLE_MODE(240, 320, 37, 49), +}; + +DEFINE_DRM_GEM_CMA_FOPS(ili9341_dbi_fops); + +static struct drm_driver ili9341_dbi_driver = { + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, + .fops = &ili9341_dbi_fops, + DRM_GEM_CMA_DRIVER_OPS_VMAP, + .debugfs_init = mipi_dbi_debugfs_init, + .name = "ili9341", + .desc = "Ilitek ILI9341", + .date = "20210716", + .major = 1, + .minor = 0, +}; + +static int _ili9341_probe(struct spi_device *spi, bool dpi) +{ + struct gpio_desc *dc; + struct gpio_desc *reset; + struct device *dev = &spi->dev; + int ret; + + reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(reset)) + DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n"); + + dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW); + if (IS_ERR(dc)) + DRM_DEV_ERROR(dev, "Failed to get gpio 'dc'\n");Small nit. Moving the above dts parse code into the main probe and have functions for dpi and !dpi would make code more readable.Okay, just to make sure I fully understand your suggestion, you ask me to change the code below, right? thanks. static int ili9341_dpi_probe(struct spi_device *spi, struct gpio_desc *dc, struct gpio_desc *reset) { .... } static int ili9341_dbi_probe(struct spi_device *spi, struct gpio_desc *dc, struct gpio_desc *reset){ .... } static int ili9341_probe(struct spi_device *spi) { .... struct device *dev = &spi->dev; struct gpio_desc *dc; struct gpio_desc *reset; const struct spi_device_id *id = spi_get_device_id(spi); reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(reset)) drm_err(dev, "Failed to get gpio 'reset'\n"); dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW); if (IS_ERR(dc)) drm_err(dev, "Failed to get gpio 'dc'\n"); if (!strcmp(id->name, "sf-tc240t-9370-t")) return ili9341_dpi_probe(spi, dc, reset); else if (!strcmp(id->name, "yx240qv29")) return ili9341_dbi_probe(spi, dc, reset); return -1; }
Perfect, thanks! Jagan. _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel