Re: [PATCH v2 3/3] drm/panel: Add ilitek ili9341 panel driver

Hi Noralf

Thanks for your time to review my patch.

On Thu, 22 Jul 2021 at 01:42, Noralf Trønnes [off-list ref] wrote:

Den 21.07.2021 09.41, skrev dillon.minfei@gmail.com:

quoted

From: Dillon Min <redacted>

This driver combine tiny/ili9341.c mipi_dbi_interface driver
with mipi_dpi_interface driver, can support ili9341 with serial
mode or parallel rgb interface mode by register configuration.

Cc: Linus Walleij <redacted>
Signed-off-by: Dillon Min <redacted>
---

quoted

+static const struct of_device_id ili9341_of_match[] = {
+     {
+             .compatible = "st,sf-tc240t-9370-t",
+             .data = &ili9341_stm32f429_disco_data,
+     },
+     {
+             /* porting from tiny/ili9341.c
+              * for original mipi dbi compitable
+              */
+             .compatible = "adafruit,yx240qv29",

I don't understand this, now there will be 2 drivers that support the
same display?

There is no reason to create two drivers to support the same display.

To support only-dbi and dbi+dpi panel at drm/panel or drm/tiny both
fine with me.

AFAICT drm/tiny/ili9341.c is just copied into this driver, is the plan
to remove the tiny/ driver? If so I couldn't see this mentioned anywhere.

Yes, I'd like to merge the code from drm/tiny/ili9341.c to this driver
(to make a single driver to support different bus).

I have two purpose to extend the feature drm/tiny/ili9341.c

- keep compatible = "adafruit,yx240qv29", add bus mode dts bindings (panel_bus)
  to define the interface which host wants to use. such as
panel_bus="dbi" or "rgb"
  or "i80" for this case, i will add dpi code to drm/tiny/ili9341.c.

- merge tiny/ili9341.c to this driver,remove drm/tiny/ili9341.c, add
new dts compatible
  string to support other interfaces. just like what i'm doing now.

I have no idea about your plan on drm/tiny drivers, actually some of
these panels under
the diny folder can support both dbi and dbi+dpi (much faster, need
more pins). no
doubt the requirement to support dpi is always there.

What is your preference?

Thanks & Regards
Dillon

Noralf.

quoted

+             .data = NULL,
+     },
+};
+MODULE_DEVICE_TABLE(of, ili9341_of_match);

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel