Thread (4 messages) flat view 4 messages, 2 authors, 2021-06-21

Re: [PATCH 2/2] arm64: dts: exynos5433: Add cpu cache information

From: Krzysztof Kozlowski <hidden>
Date: 2021-06-21 08:51:59
Also in: linux-samsung-soc, lkml

On 17/06/2021 13:37, Alim Akhtar wrote:
quoted hunk ↗ jump to hunk
This patch adds cpu caches information to its dt
nodes so that the same is available to userspace
via sysfs.
This SoC has 48/32 KB I/D cache for each A57 cores
with 2MB L2 cache.
And 32/32 KB I/D cache for each A53 cores with
256KB L2 cache.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
---
 arch/arm64/boot/dts/exynos/exynos5433.dtsi | 70 ++++++++++++++++++++++
 1 file changed, 70 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 18a912eee360..8183a59e9046 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -62,6 +62,13 @@
 			clock-names = "apolloclk";
 			operating-points-v2 = <&cluster_a53_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&apollo_l2>;
 		};
 
 		cpu1: cpu@101 {
@@ -72,6 +79,13 @@
 			clock-frequency = <1300000000>;
 			operating-points-v2 = <&cluster_a53_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&apollo_l2>;
 		};
 
 		cpu2: cpu@102 {
@@ -82,6 +96,13 @@
 			clock-frequency = <1300000000>;
 			operating-points-v2 = <&cluster_a53_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&apollo_l2>;
 		};
 
 		cpu3: cpu@103 {
@@ -92,6 +113,13 @@
 			clock-frequency = <1300000000>;
 			operating-points-v2 = <&cluster_a53_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&apollo_l2>;
 		};
 
 		cpu4: cpu@0 {
@@ -104,6 +132,13 @@
 			clock-names = "atlasclk";
 			operating-points-v2 = <&cluster_a57_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
 		};
 
 		cpu5: cpu@1 {
@@ -114,6 +149,13 @@
 			clock-frequency = <1900000000>;
 			operating-points-v2 = <&cluster_a57_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
 		};
 
 		cpu6: cpu@2 {
@@ -124,6 +166,13 @@
 			clock-frequency = <1900000000>;
 			operating-points-v2 = <&cluster_a57_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
 		};
 
 		cpu7: cpu@3 {
@@ -134,6 +183,27 @@
 			clock-frequency = <1900000000>;
 			operating-points-v2 = <&cluster_a57_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
+		};
+
+		atlas_l2: l2-cache0 {
Few other nodes (PMU, OPP tables) use a57/a53 names instead of
codenames, so I would prefer to stay with them (so cluster_a57_l2).

For Exynos7 it's fine as it uses Atlas already in labels.
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+
+		apollo_l2: l2-cache1 {
+			compatible = "cache";
+			cache-size = <0x40000>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
 		};
 	};
 

Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help