[PATCH 1/2] arm64: dts: exynos7: Add cpu cache information

This patch adds cpu caches information to its dt
nodes so that the same is available to userspace
via sysfs.
This SoC has 48/32 KB I/D cache for each cores
and 2MB of L2 cache.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
---
 arch/arm64/boot/dts/exynos/exynos7.dtsi | 35 +++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 10244e59d56d..8b06397ba6e7 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi

@@ -54,6 +54,13 @@
 			compatible = "arm,cortex-a57";
 			reg = <0x0>;
 			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
 		};
 
 		cpu_atlas1: cpu@1 {

@@ -61,6 +68,13 @@
 			compatible = "arm,cortex-a57";
 			reg = <0x1>;
 			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
 		};
 
 		cpu_atlas2: cpu@2 {

@@ -68,6 +82,13 @@
 			compatible = "arm,cortex-a57";
 			reg = <0x2>;
 			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
 		};
 
 		cpu_atlas3: cpu@3 {

@@ -75,6 +96,20 @@
 			compatible = "arm,cortex-a57";
 			reg = <0x3>;
 			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
+		};
+
+		atlas_l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
 		};
 	};
 

base-commit: 614124bea77e452aa6df7a8714e8bc820b489922
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

This patch adds cpu caches information to its dt
nodes so that the same is available to userspace
via sysfs.
This SoC has 48/32 KB I/D cache for each A57 cores
with 2MB L2 cache.
And 32/32 KB I/D cache for each A53 cores with
256KB L2 cache.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
---
 arch/arm64/boot/dts/exynos/exynos5433.dtsi | 70 ++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 18a912eee360..8183a59e9046 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi

@@ -62,6 +62,13 @@
 			clock-names = "apolloclk";
 			operating-points-v2 = <&cluster_a53_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&apollo_l2>;
 		};
 
 		cpu1: cpu@101 {

@@ -72,6 +79,13 @@
 			clock-frequency = <1300000000>;
 			operating-points-v2 = <&cluster_a53_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&apollo_l2>;
 		};
 
 		cpu2: cpu@102 {

@@ -82,6 +96,13 @@
 			clock-frequency = <1300000000>;
 			operating-points-v2 = <&cluster_a53_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&apollo_l2>;
 		};
 
 		cpu3: cpu@103 {

@@ -92,6 +113,13 @@
 			clock-frequency = <1300000000>;
 			operating-points-v2 = <&cluster_a53_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&apollo_l2>;
 		};
 
 		cpu4: cpu@0 {

@@ -104,6 +132,13 @@
 			clock-names = "atlasclk";
 			operating-points-v2 = <&cluster_a57_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
 		};
 
 		cpu5: cpu@1 {

@@ -114,6 +149,13 @@
 			clock-frequency = <1900000000>;
 			operating-points-v2 = <&cluster_a57_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
 		};
 
 		cpu6: cpu@2 {

@@ -124,6 +166,13 @@
 			clock-frequency = <1900000000>;
 			operating-points-v2 = <&cluster_a57_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
 		};
 
 		cpu7: cpu@3 {

@@ -134,6 +183,27 @@
 			clock-frequency = <1900000000>;
 			operating-points-v2 = <&cluster_a57_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
+		};
+
+		atlas_l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+
+		apollo_l2: l2-cache1 {
+			compatible = "cache";
+			cache-size = <0x40000>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
 		};
 	};
 

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

On 17/06/2021 13:37, Alim Akhtar wrote:

Few other nodes (PMU, OPP tables) use a57/a53 names instead of
codenames, so I would prefer to stay with them (so cluster_a57_l2).

For Exynos7 it's fine as it uses Atlas already in labels.

+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+
+		apollo_l2: l2-cache1 {
+			compatible = "cache";
+			cache-size = <0x40000>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
 		};
 	};
 

Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Hello Krzysztof

-----Original Message-----
From: Krzysztof Kozlowski <redacted>
Sent: 21 June 2021 14:22
To: Alim Akhtar <alim.akhtar@samsung.com>; linux-kernel@vger.kernel.org;
linux-arm-kernel@lists.infradead.org; robh+dt@kernel.org
Cc: linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH 2/2] arm64: dts: exynos5433: Add cpu cache information

On 17/06/2021 13:37, Alim Akhtar wrote:

quoted

This patch adds cpu caches information to its dt nodes so that the
same is available to userspace via sysfs.
This SoC has 48/32 KB I/D cache for each A57 cores with 2MB L2 cache.
And 32/32 KB I/D cache for each A53 cores with 256KB L2 cache.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
---
 arch/arm64/boot/dts/exynos/exynos5433.dtsi | 70
++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi

b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 18a912eee360..8183a59e9046 100644

--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi

@@ -62,6 +62,13 @@
 			clock-names = "apolloclk";
 			operating-points-v2 = <&cluster_a53_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&apollo_l2>;
 		};

 		cpu1: cpu@101 {

@@ -72,6 +79,13 @@
 			clock-frequency = <1300000000>;
 			operating-points-v2 = <&cluster_a53_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&apollo_l2>;
 		};

 		cpu2: cpu@102 {

@@ -82,6 +96,13 @@
 			clock-frequency = <1300000000>;
 			operating-points-v2 = <&cluster_a53_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&apollo_l2>;
 		};

 		cpu3: cpu@103 {

@@ -92,6 +113,13 @@
 			clock-frequency = <1300000000>;
 			operating-points-v2 = <&cluster_a53_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&apollo_l2>;
 		};

 		cpu4: cpu@0 {

@@ -104,6 +132,13 @@
 			clock-names = "atlasclk";
 			operating-points-v2 = <&cluster_a57_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
 		};

 		cpu5: cpu@1 {

@@ -114,6 +149,13 @@
 			clock-frequency = <1900000000>;
 			operating-points-v2 = <&cluster_a57_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
 		};

 		cpu6: cpu@2 {

@@ -124,6 +166,13 @@
 			clock-frequency = <1900000000>;
 			operating-points-v2 = <&cluster_a57_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
 		};

 		cpu7: cpu@3 {

@@ -134,6 +183,27 @@
 			clock-frequency = <1900000000>;
 			operating-points-v2 = <&cluster_a57_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
+		};
+
+		atlas_l2: l2-cache0 {

Few other nodes (PMU, OPP tables) use a57/a53 names instead of
codenames, so I would prefer to stay with them (so cluster_a57_l2).

Thanks for review, will update in next patch set.

For Exynos7 it's fine as it uses Atlas already in labels.

quoted

+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+
+		apollo_l2: l2-cache1 {
+			compatible = "cache";
+			cache-size = <0x40000>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
 		};
 	};

Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel