Thread (8 messages) flat view 8 messages, 3 authors, 2021-08-14
STALE1816d

[PATCH v2 1/1] arm64: dts: lx2160a: Fix the compatible string of LX2160A UART

From: Zhen Lei <hidden>
Date: 2021-06-15 13:17:47
Also in: linux-devicetree, lkml
Subsystem: arm/freescale layerscape arm architecture, the rest · Maintainers: Frank Li, Linus Torvalds

Mark Kettenis told us that:
According to the NXP documentation, the LX2160A has a real PL011 UART.

Therefore, rewrite it to the compatible string of pl011. The property
"current-speed" specific to "arm,sbsa-uart" is also deleted.

Suggested-by: Shawn Guo <shawnguo@kernel.org>
Suggested-by: Mark Kettenis <redacted>
Signed-off-by: Zhen Lei <redacted>
---
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index c4b1a59ba424..d2e6f7285674 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -920,34 +920,30 @@ QORIQ_CLK_PLL_DIV(8)>,
 		};
 
 		uart0: serial@21c0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0x21c0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart1: serial@21d0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0x21d0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart2: serial@21e0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0x21e0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart3: serial@21f0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0x21f0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
-- 
2.25.1



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help