[PATCH v2 01/33] arm64: zynqmp: Disable CCI by default
From: Michal Simek <hidden>
Date: 2021-06-14 15:28:07
Also in:
linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
There is no reason to have CCI no enabled by default. Enable it when your system configuration requires it. In Xilinx configuration flow this is work for Device Tree Generator which reads information from HW Design configuration. Signed-off-by: Michal Simek <redacted> --- Changes in v2: None arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 28dccb891a53..302ca0196c34 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi@@ -245,6 +245,7 @@ can1: can@ff070000 { cci: cci@fd6e0000 { compatible = "arm,cci-400"; + status = "disabled"; reg = <0x0 0xfd6e0000 0x0 0x9000>; ranges = <0x0 0x0 0xfd6e0000 0x10000>; #address-cells = <1>;
--
2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel