[PATCH v2 28/33] arm64: zynqmp: Sync psgtr node location with zcu104-revA
From: Michal Simek <hidden>
Date: 2021-06-14 15:27:26
Also in:
linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
zcu104-revA has node below pinctrl which is not the same on revC. Sync location for easier comparison. Also zc1751-dc1 is not using this position. Signed-off-by: Michal Simek <redacted> --- Changes in v2: None .../boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 14 +++++++------- arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts | 14 +++++++------- 2 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
index 9f176307b62a..d78439e891b9 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts@@ -58,13 +58,6 @@ clock_si5338_3: clk150 { }; }; -&psgtr { - status = "okay"; - /* dp, usb3, sata */ - clocks = <&clock_si5338_0>, <&clock_si5338_2>, <&clock_si5338_3>; - clock-names = "ref1", "ref2", "ref3"; -}; - &fpd_dma_chan1 { status = "okay"; };
@@ -340,6 +333,13 @@ conf { }; }; +&psgtr { + status = "okay"; + /* dp, usb3, sata */ + clocks = <&clock_si5338_0>, <&clock_si5338_2>, <&clock_si5338_3>; + clock-names = "ref1", "ref2", "ref3"; +}; + &qspi { status = "okay"; flash@0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
index fb8d76b5c27f..c21d9612ce04 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts@@ -429,6 +429,13 @@ conf-tx { }; }; +&psgtr { + status = "okay"; + /* nc, sata, usb3, dp */ + clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>; + clock-names = "ref1", "ref2", "ref3"; +}; + &qspi { status = "okay"; flash@0 {
@@ -446,13 +453,6 @@ &rtc { status = "okay"; }; -&psgtr { - status = "okay"; - /* nc, sata, usb3, dp */ - clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>; - clock-names = "ref1", "ref2", "ref3"; -}; - &sata { status = "okay"; /* SATA OOB timing settings */
--
2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel