Thread (28 messages) 28 messages, 4 authors, 2021-09-13

Re: [PATCH 08/25] media: atmel: properly get pm_runtime

From: <hidden>
Date: 2021-06-10 12:00:46
Also in: linux-media, lkml

On 6/10/21 12:38 PM, Mauro Carvalho Chehab wrote:
EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

Em Thu, 10 Jun 2021 09:04:07 +0000
[off-list ref] escreveu:
quoted
quoted
quoted
diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
index fe3ec8d0eaee..ce8e1351fa53 100644
--- a/drivers/media/platform/atmel/atmel-isc-base.c
+++ b/drivers/media/platform/atmel/atmel-isc-base.c
@@ -294,9 +294,13 @@ static int isc_wait_clk_stable(struct clk_hw *hw)
   static int isc_clk_prepare(struct clk_hw *hw)
   {
        struct isc_clk *isc_clk = to_isc_clk(hw);
+     int ret;

-     if (isc_clk->id == ISC_ISPCK)
-             pm_runtime_get_sync(isc_clk->dev);
+     if (isc_clk->id == ISC_ISPCK) {
+             ret = pm_runtime_resume_and_get(isc_clk->dev);
+             if (ret < 0)
+                     return ret;
+     }
Hi Mauro,

With this patch, the ISC is broken on latest media tree. It looks like
pm_runtime_resume_and_get for the ISC_ISPCK clock returns -ENOACCESS and
thus, the probe of the driver fails:

atmel-sama5d2-isc f0008000.isc: failed to enable ispck: -13
atmel-sama5d2-isc: probe of f0008000.isc failed with error -13


Could you point out how I could fix this ? Maybe the isc_clk->dev is not
properly handled/initialized in some other part of the code ?
Looking at RPM implementation:

         static int rpm_resume(struct device *dev, int rpmflags)
         {
...
         if (dev->power.runtime_error)
                 retval = -EINVAL;
         else if (dev->power.disable_depth == 1 && dev->power.is_suspended
             && dev->power.runtime_status == RPM_ACTIVE)
                 retval = 1;
         else if (dev->power.disable_depth > 0)
                 retval = -EACCES;
...

It sounds that RPM is disabled for this clock. Did you call
pm_runtime_enable() before calling isc_clk_prepare()?

Thanks,
Mauro
I tried to call pm_runtime_enable for the clk at clk_init time, but 
doing that makes the runtime for the ISC fail like this:

atmel-sama5d2-isc f0008000.isc: Unbalanced pm_runtime_enable!
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help