@@ -1,21 +1,37 @@
-Xilinx AXI/PLB soft-core watchdog Device Tree Bindings
----------------------------------------------------------
+Xilinx AXI/PLB soft-core watchdog and window watchdog Device Tree Bindings
+--------------------------------------------------------------------------
 
 Required properties:
 - compatible		: Should be "xlnx,xps-timebase-wdt-1.00.a" or
-			  "xlnx,xps-timebase-wdt-1.01.a".
+			  "xlnx,xps-timebase-wdt-1.01.a" or
+			  "xlnx,versal-wwdt-1.0".
 - reg			: Physical base address and size
 
 Optional properties:
 - clocks		: Input clock specifier. Refer to common clock
 			  bindings.
 - clock-frequency	: Frequency of clock in Hz
+
+Optional properties for AXI/PLB soft-core watchdog:
 - xlnx,wdt-enable-once	: 0 - Watchdog can be restarted
 			  1 - Watchdog can be enabled just once
 - xlnx,wdt-interval	: Watchdog timeout interval in 2^<val> clock cycles,
 			  <val> is integer from 8 to 31.
 
+Optional properties for window watchdog:
+- timeout-sec          : Watchdog timeout value (in seconds).
+			 if unset, the default timeout is 10 seconds.
+- pretimeout-sec	: Watchdog pretimeout value in seconds.
+- interrupts		: IRQ line for the WWDT.
+- interrupt-names	: Interrupt line names "wdt" or "wwdt_reset_pending".
+			  wdt - will assert high after first (closed) window
+			  timer expires. wwdt_reset_pending - will assert high
+			  after second (open) window timer expires if WRP
+			  (Watchdog Reset pending) is configured with third
+			  (SST) timer.
+
 Example:
+Xilinx AXI/PLB soft-core watchdog:
 axi-timebase-wdt@40100000 {
 	clock-frequency = <50000000>;
 	compatible = "xlnx,xps-timebase-wdt-1.00.a";

@@ -24,3 +40,14 @@ axi-timebase-wdt@40100000 {
 	xlnx,wdt-enable-once = <0x0>;
 	xlnx,wdt-interval = <0x1b>;
 } ;
+
+Xilinx Versal window watchdog:
+watchdog@fd4d0000 {
+	compatible = "xlnx,versal-wwdt-1.0";
+	reg = <0x0 0xfd4d0000 0x0 0x10000>;
+	clocks = <&clk25>;
+	timeout-sec = <10>;
+	interrupt-names = "wdt", "wwdt_reset_pending";
+	interrupts = <0x0 0x64 0x1>, <0x0 0x6D 0x1>;
+	pretimeout-sec = <5>;
+} ;