Re: [PATCH v2 2/4] net: stmmac: Add Toshiba Visconti SoCs glue driver

Hi,

On Sun, Feb 14, 2021 at 08:23:25AM +0200, Leon Romanovsky wrote:

On Fri, Feb 12, 2021 at 11:58:04AM +0900, Nobuhiro Iwamatsu wrote:

quoted

Add dwmac-visconti to the stmmac driver in Toshiba Visconti ARM SoCs.
This patch contains only the basic function of the device. There is no
clock control, PM, etc. yet. These will be added in the future.

Signed-off-by: Nobuhiro Iwamatsu <redacted>
---
 drivers/net/ethernet/stmicro/stmmac/Kconfig   |   8 +
 drivers/net/ethernet/stmicro/stmmac/Makefile  |   1 +
 .../ethernet/stmicro/stmmac/dwmac-visconti.c  | 288 ++++++++++++++++++
 3 files changed, 297 insertions(+)
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 53f14c5a9e02..55ba67a550b9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig

@@ -219,6 +219,14 @@ config DWMAC_INTEL_PLAT
 	  This selects the Intel platform specific glue layer support for
 	  the stmmac device driver. This driver is used for the Intel Keem Bay
 	  SoC.
+
+config DWMAC_VISCONTI
+	bool "Toshiba Visconti DWMAC support"
+	def_bool y

Doesn't it need to be "default y"?

Indeed. I will remove this.

Thanks.

Best regards,
  Nobuhiro

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel