[PATCH v2 07/12] fix: ARM64: dts: cp110: Switch to 8-bit ECC NAND setting
From: <hidden>
Date: 2021-02-10 14:12:04
Also in:
linux-devicetree, lkml
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds
From: Konstantin Porotchkin <redacted> All A7K/A8K boards are using NAND chip that supports 8 bit ECC strength. Using lower ECC strength is not recommended by the flash manufacturer and may cause data corruption. This patch changes the nand-ecc-strength value from 4 to 8. Signed-off-by: Konstantin Porotchkin <redacted> --- arch/arm64/boot/dts/marvell/armada-7040-db.dts | 2 +- arch/arm64/boot/dts/marvell/armada-8040-db.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index f8179cadc610..39f1d393664f 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts@@ -169,7 +169,7 @@ label = "pxa3xx_nand-0"; nand-rb = <0>; nand-on-flash-bbt; - nand-ecc-strength = <4>; + nand-ecc-strength = <8>; nand-ecc-step-size = <512>; partitions {
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 790c7ab0b816..372eda1f8898 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts@@ -281,7 +281,7 @@ reg = <0>; nand-rb = <0>; nand-on-flash-bbt; - nand-ecc-strength = <4>; + nand-ecc-strength = <8>; nand-ecc-step-size = <512>; partitions {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel