Re: [PATCH v7 2/3] arm64: dts: armada: add pwm offsets for ap/cp gpios
From: Gregory CLEMENT <gregory.clement@bootlin.com>
Date: 2021-01-29 15:57:17
Hello Bartosz,
On Mon, Jan 11, 2021 at 12:47 PM Baruch Siach [off-list ref] wrote:quoted
The 'marvell,pwm-offset' property of both GPIO blocks (per CP component) point to the same counter registers offset. The driver will decide how to use counters A/B. This is different from the convention of pwm on earlier Armada series (370/38x). On those systems the assignment of A/B counters to GPIO blocks is coded in both DT and the driver. The actual behaviour of the current driver on Armada 8K/7K is the same as earlier systems. Add also clock properties for base pwm frequency reference. Signed-off-by: Baruch Siach <baruch@tkos.co.il> ---Andrew, Gregory, Sebastian, Can we get your Acks on this patch? Are you fine with it going through the GPIO tree?
I prefer applying it on our tree to avoid merge conflicts. Gregory
Bartosz
-- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel