Re: [PATCH v2] arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4
From: Kevin Hilman <khilman@baylibre.com>
Date: 2021-01-25 18:45:19
Also in:
linux-amlogic
On Fri, 22 Jan 2021 06:52:18 +0100, Marek Szyprowski wrote:
For the proper reboot Odroid-C4 board requires to switch TFLASH_VDD_EN pin to the high impedance mode, otherwise the board is stuck in the middle of loading early stages of the bootloader from SD card. This can be achieved by using the OPEN_DRAIN flag instead of the ACTIVE_HIGH, what will leave the pin in input mode to achieve high state (pin has the pull-up) and solve the issue.
Applied, thanks!
[1/1] arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4
commit: c649d91a8ec4dda78bcbd3890156bffb4df2fa16
Best regards,
--
Kevin Hilman [off-list ref]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel