[PATCH v1 1/4] devicetree: phy: rockchip-emmc optional add vendor prefix
From: Chris Ruehl <hidden>
Date: 2020-12-14 03:00:47
Also in:
linux-devicetree, linux-rockchip, lkml
Subsystem:
generic phy framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Vinod Koul, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Update the documentation and add the vendor prefix to the optional properties referred in vendor-prefixes.yaml. Signed-off-by: Chris Ruehl <redacted> --- .../bindings/phy/rockchip-emmc-phy.txt | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
index 00aa2d349e55..3a55d8086868 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt@@ -13,14 +13,15 @@ Optional properties: access to it), it is strongly suggested. See ../clock/clock-bindings.txt for details. - clocks: Should have a phandle to the card clock exported by the SDHCI driver. - - drive-impedance-ohm: Specifies the drive impedance in Ohm. - Possible values are 33, 40, 50, 66 and 100. - If not set, the default value of 50 will be applied. - - enable-strobe-pulldown: Enable internal pull-down for the strobe line. - If not set, pull-down is not used. - - output-tapdelay-select: Specifies the phyctrl_otapdlysec register. - If not set, the register defaults to 0x4. - Maximum value 0xf. + - rockchip,drive-impedance-ohm: Specifies the drive impedance in Ohm. + Possible values are 33, 40, 50, 66 and 100. + If not set, the default value of 50 will be + applied. + - rockchip,enable-strobe-pulldown: Enable internal pull-down for the strobe + line. If not set, pull-down is not used. + - rockchip,output-tapdelay-select: Specifies the phyctrl_otapdlysec register. + If not set, the register defaults to 0x4. + Maximum value 0xf. Example:
@@ -37,7 +38,7 @@ grf: syscon@ff770000 { reg = <0xf780 0x20>; clocks = <&sdhci>; clock-names = "emmcclk"; - drive-impedance-ohm = <50>; + rockchip,drive-impedance-ohm = <50>; #phy-cells = <0>; }; };
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel