Re: [PATCH 5/9] iio: adc: at91_adc: merge at91_adc_probe_dt back in at91_adc_probe
From: Jonathan Cameron <jic23@kernel.org>
Date: 2020-11-14 17:08:12
Also in:
linux-devicetree, linux-iio, lkml
On Fri, 13 Nov 2020 22:26:46 +0100 Alexandre Belloni [off-list ref] wrote:
at91_adc_probe_dt is now small enough to be merged back in at91_adc_probe. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Minor largely unrelated suggestion inline as we are touching this code. Thanks, Jonathan
quoted hunk ↗ jump to hunk
--- drivers/iio/adc/at91_adc.c | 118 +++++++++++++++---------------------- 1 file changed, 49 insertions(+), 69 deletions(-)diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 83539422b704..9f05eb722f5e 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c@@ -833,70 +833,6 @@ static int at91_adc_probe_dt_ts(struct device_node *node, } } -static int at91_adc_probe_dt(struct iio_dev *idev, - struct platform_device *pdev) -{ - struct at91_adc_state *st = iio_priv(idev); - struct device_node *node = pdev->dev.of_node; - int ret; - u32 prop; - char *s; - - st->caps = (struct at91_adc_caps *) - of_match_device(at91_adc_dt_ids, &pdev->dev)->data; - - st->use_external = of_property_read_bool(node, "atmel,adc-use-external-triggers"); - - if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) { - dev_err(&idev->dev, "Missing adc-channels-used property in the DT.\n"); - ret = -EINVAL; - goto error_ret; - } - st->channels_mask = prop; - - st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode"); - - if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) { - dev_err(&idev->dev, "Missing adc-startup-time property in the DT.\n"); - ret = -EINVAL; - goto error_ret; - } - st->startup_time = prop; - - prop = 0; - of_property_read_u32(node, "atmel,adc-sample-hold-time", &prop); - st->sample_hold_time = prop; - - if (of_property_read_u32(node, "atmel,adc-vref", &prop)) { - dev_err(&idev->dev, "Missing adc-vref property in the DT.\n"); - ret = -EINVAL; - goto error_ret; - } - st->vref_mv = prop; - - st->res = st->caps->high_res_bits; - if (st->caps->low_res_bits && - !of_property_read_string(node, "atmel,adc-use-res", (const char **)&s) - && !strcmp(s, "lowres")) - st->res = st->caps->low_res_bits; - - dev_info(&idev->dev, "Resolution used: %u bits\n", st->res); - - st->registers = &st->caps->registers; - st->num_channels = st->caps->num_channels; - - /* Check if touchscreen is supported. */ - if (st->caps->has_ts) - return at91_adc_probe_dt_ts(node, st, &idev->dev); - else - dev_info(&idev->dev, "not support touchscreen in the adc compatible string.\n"); - - return 0; - -error_ret: - return ret; -} - static const struct iio_info at91_adc_info = { .read_raw = &at91_adc_read_raw, };@@ -1062,10 +998,12 @@ static void at91_ts_unregister(struct at91_adc_state *st) static int at91_adc_probe(struct platform_device *pdev) { unsigned int prsc, mstrclk, ticks, adc_clk, adc_clk_khz, shtim; + struct device_node *node = pdev->dev.of_node; int ret; struct iio_dev *idev; struct at91_adc_state *st; - u32 reg; + u32 reg, prop; + char *s; idev = devm_iio_device_alloc(&pdev->dev, sizeof(struct at91_adc_state)); if (!idev)@@ -1073,9 +1011,52 @@ static int at91_adc_probe(struct platform_device *pdev) st = iio_priv(idev); - ret = at91_adc_probe_dt(idev, pdev); - if (ret) - return ret; + st->caps = (struct at91_adc_caps *) + of_match_device(at91_adc_dt_ids, &pdev->dev)->data;
of_device_get match_data - obviously an unrelated change but trivial enough I'd just slip it in this patch (unless you have it a later one!) That returns a void * so no need for the cast.
quoted hunk ↗ jump to hunk
+ + st->use_external = of_property_read_bool(node, "atmel,adc-use-external-triggers"); + + if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) { + dev_err(&idev->dev, "Missing adc-channels-used property in the DT.\n"); + return -EINVAL; + } + st->channels_mask = prop; + + st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode"); + + if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) { + dev_err(&idev->dev, "Missing adc-startup-time property in the DT.\n"); + return -EINVAL; + } + st->startup_time = prop; + + prop = 0; + of_property_read_u32(node, "atmel,adc-sample-hold-time", &prop); + st->sample_hold_time = prop; + + if (of_property_read_u32(node, "atmel,adc-vref", &prop)) { + dev_err(&idev->dev, "Missing adc-vref property in the DT.\n"); + return -EINVAL; + } + st->vref_mv = prop; + + st->res = st->caps->high_res_bits; + if (st->caps->low_res_bits && + !of_property_read_string(node, "atmel,adc-use-res", (const char **)&s) + && !strcmp(s, "lowres")) + st->res = st->caps->low_res_bits; + + dev_info(&idev->dev, "Resolution used: %u bits\n", st->res); + + st->registers = &st->caps->registers; + st->num_channels = st->caps->num_channels; + + /* Check if touchscreen is supported. */ + if (st->caps->has_ts) { + ret = at91_adc_probe_dt_ts(node, st, &idev->dev); + if (ret) + return ret; + } platform_set_drvdata(pdev, idev);@@ -1091,7 +1072,6 @@ static int at91_adc_probe(struct platform_device *pdev) if (IS_ERR(st->reg_base)) return PTR_ERR(st->reg_base); -
Stray change that shouldn't be in this patch ideally but not that important.
/* * Disable all IRQs before setting up the handler */
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel