Thread (12 messages) 12 messages, 4 authors, 2020-10-26

Re: [PATCH v3 3/5] net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver

flat view

From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: 2020-10-22 07:16:21
Also in: linux-devicetree, linux-samsung-soc, lkml, netdev

Possibly related (same subject, not in this thread)

On 21.10.2020 23:49, Łukasz Stelmach wrote:
ASIX AX88796[1] is a versatile ethernet adapter chip, that can be
connected to a CPU with a 8/16-bit bus or with an SPI. This driver
supports SPI connection.

The driver has been ported from the vendor kernel for ARTIK5[2]
boards. Several changes were made to adapt it to the current kernel
which include:

+ updated DT configuration,
+ clock configuration moved to DT,
+ new timer, ethtool and gpio APIs,
+ dev_* instead of pr_* and custom printk() wrappers,
+ removed awkward vendor power managemtn.

[1] https://www.asix.com.tw/products.php?op=pItemdetail&PItemID=104;65;86&PLine=65
[2] https://git.tizen.org/cgit/profile/common/platform/kernel/linux-3.10-artik/

The other ax88796 driver is for NE2000 compatible AX88796L chip. These
chips are not compatible. Hence, two separate drivers are required.

Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
coś zaszalałeś, jak dobry koreański kod - push bez kompilacji ;)

drivers/net/ethernet/asix/ax88796c_main.c:758:13: error: static 
declaration of ‘ax88796c_set_csums’ follows non-static declaration
  static void ax88796c_set_csums(struct ax88796c_device *ax_local)
              ^
In file included from drivers/net/ethernet/asix/ax88796c_main.c:12:0:
drivers/net/ethernet/asix/ax88796c_ioctl.h:24:6: note: previous 
declaration of ‘ax88796c_set_csums’ was here
  void ax88796c_set_csums(struct ax88796c_device *ax_local);
       ^
scripts/Makefile.build:283: recipe for target 
'drivers/net/ethernet/asix/ax88796c_main.o' failed
make[4]: *** [drivers/net/ethernet/asix/ax88796c_main.o] Error 1
scripts/Makefile.build:500: recipe for target 
'drivers/net/ethernet/asix' failed
make[3]: *** [drivers/net/ethernet/asix] Error 2
scripts/Makefile.build:500: recipe for target 'drivers/net/ethernet' failed
make[2]: *** [drivers/net/ethernet] Error 2
scripts/Makefile.build:500: recipe for target 'drivers/net' failed
make[1]: *** [drivers/net] Error 2

 > ...

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help