Re: [PATCH v3 3/5] net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver
From: Lukasz Stelmach <l.stelmach@samsung.com>
Date: 2020-10-22 10:01:55
Also in:
linux-devicetree, linux-samsung-soc, lkml, netdev
It was <2020-10-22 czw 09:15>, when Marek Szyprowski wrote:
On 21.10.2020 23:49, Łukasz Stelmach wrote:quoted
ASIX AX88796[1] is a versatile ethernet adapter chip, that can be connected to a CPU with a 8/16-bit bus or with an SPI. This driver supports SPI connection. The driver has been ported from the vendor kernel for ARTIK5[2] boards. Several changes were made to adapt it to the current kernel which include: + updated DT configuration, + clock configuration moved to DT, + new timer, ethtool and gpio APIs, + dev_* instead of pr_* and custom printk() wrappers, + removed awkward vendor power managemtn. [1] https://www.asix.com.tw/products.php?op=pItemdetail&PItemID=104;65;86&PLine=65 [2] https://git.tizen.org/cgit/profile/common/platform/kernel/linux-3.10-artik/ The other ax88796 driver is for NE2000 compatible AX88796L chip. These chips are not compatible. Hence, two separate drivers are required. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>coś zaszalałeś, jak dobry koreański kod - push bez kompilacji ;) drivers/net/ethernet/asix/ax88796c_main.c:758:13: error: static declaration of ‘ax88796c_set_csums’ follows non-static declaration static void ax88796c_set_csums(struct ax88796c_device *ax_local) ^ In file included from drivers/net/ethernet/asix/ax88796c_main.c:12:0: drivers/net/ethernet/asix/ax88796c_ioctl.h:24:6: note: previous declaration of ‘ax88796c_set_csums’ was here void ax88796c_set_csums(struct ax88796c_device *ax_local); ^ scripts/Makefile.build:283: recipe for target 'drivers/net/ethernet/asix/ax88796c_main.o' failed make[4]: *** [drivers/net/ethernet/asix/ax88796c_main.o] Error 1 scripts/Makefile.build:500: recipe for target 'drivers/net/ethernet/asix' failed make[3]: *** [drivers/net/ethernet/asix] Error 2 scripts/Makefile.build:500: recipe for target 'drivers/net/ethernet' failed make[2]: *** [drivers/net/ethernet] Error 2 scripts/Makefile.build:500: recipe for target 'drivers/net' failed make[1]: *** [drivers/net] Error 2
Fixed. Thanks. -- Łukasz Stelmach Samsung R&D Institute Poland Samsung Electronics