[PATCH v3 3/6] phy/rockchip: inno-hdmi: remove unused no_c from rk3328 recalc_rate
From: Jonas Karlman <jonas@kwiboo.se>
Date: 2020-10-10 22:51:59
Also in:
linux-rockchip, lkml
Subsystem:
arm/rockchip soc support, generic phy framework, the rest · Maintainers:
Heiko Stuebner, Vinod Koul, Linus Torvalds
no_c is not used in any calculation, lets remove it. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- drivers/phy/rockchip/phy-rockchip-inno-hdmi.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
index 093d2334e8cd..06db69c8373e 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c@@ -714,7 +714,7 @@ unsigned long inno_hdmi_phy_rk3328_clk_recalc_rate(struct clk_hw *hw, { struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); unsigned long frac; - u8 nd, no_a, no_b, no_c, no_d; + u8 nd, no_a, no_b, no_d; u64 vco; u16 nf;
@@ -737,9 +737,6 @@ unsigned long inno_hdmi_phy_rk3328_clk_recalc_rate(struct clk_hw *hw, no_b = inno_read(inno, 0xa5) & RK3328_PRE_PLL_PCLK_DIV_B_MASK; no_b >>= RK3328_PRE_PLL_PCLK_DIV_B_SHIFT; no_b += 2; - no_c = inno_read(inno, 0xa6) & RK3328_PRE_PLL_PCLK_DIV_C_MASK; - no_c >>= RK3328_PRE_PLL_PCLK_DIV_C_SHIFT; - no_c = 1 << no_c; no_d = inno_read(inno, 0xa6) & RK3328_PRE_PLL_PCLK_DIV_D_MASK; do_div(vco, (nd * (no_a == 1 ? no_b : no_a) * no_d * 2));
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel