[PATCH 3/8] arm64: dts: ti: k3-j7200-common-proc-board: Disable unused gpio modules
From: Faiz Abbas <hidden>
Date: 2020-10-01 19:06:19
Also in:
linux-devicetree, lkml
Subsystem:
arm/texas instruments k3 architecture, the rest · Maintainers:
Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Linus Torvalds
There are 6 gpio instances inside SoC with 2 groups as show below: Group one: wkup_gpio0, wkup_gpio1 Group two: main_gpio0, main_gpio2, main_gpio4, main_gpio6 Only one instance from each group can be used at a time. So use main_gpio0 and wkup_gpio0 in current linux context and disable the rest of the nodes. Signed-off-by: Faiz Abbas <redacted> --- .../boot/dts/ti/k3-j7200-common-proc-board.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 1541311cecb4..50d330245a42 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts@@ -120,6 +120,22 @@ status = "disabled"; }; +&main_gpio2 { + status = "disabled"; +}; + +&main_gpio4 { + status = "disabled"; +}; + +&main_gpio6 { + status = "disabled"; +}; + +&wkup_gpio1 { + status = "disabled"; +}; + &mcu_cpsw { pinctrl-names = "default"; pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel