[PATCH 2/5] dt-bindings: usb: amlogic, meson-g12a-usb-ctrl: add the Amlogic AXG Families USB Glue Bindings
From: Neil Armstrong <hidden>
Date: 2020-09-09 16:07:16
Also in:
linux-amlogic, linux-devicetree, linux-usb, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, usb subsystem · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman
The Amlogic AXG is close from the GXL Glue but with a single OTG PHY. Signed-off-by: Neil Armstrong <redacted> --- .../usb/amlogic,meson-g12a-usb-ctrl.yaml | 22 ++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
index 5b04a7dfa018..c0058332b967 100644
--- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
+++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml@@ -25,13 +25,14 @@ description: | The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in host-only mode. - The Amlogic GXL & GXM SoCs doesn't embed an USB3 PHY. + The Amlogic GXL, GXM & AXG SoCs doesn't embed an USB3 PHY. properties: compatible: enum: - amlogic,meson-gxl-usb-ctrl - amlogic,meson-gxm-usb-ctrl + - amlogic,meson-axg-usb-ctrl - amlogic,meson-g12a-usb-ctrl - amlogic,meson-a1-usb-ctrl
@@ -151,6 +152,25 @@ allOf: required: - clock-names + - if: + properties: + compatible: + enum: + - amlogic,meson-axg-usb-ctrl + + then: + properties: + phy-names: + items: + - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used + clocks: + minItems: 2 + clock-names: + items: + - const: usb_ctrl + - const: ddr + required: + - clock-names - if: properties: compatible:
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel