Re: [PATCH 1/2] phy: marvell: comphy: Convert internal SMCC firmware return codes to errno
From: Andrew Lunn <andrew@lunn.ch>
Date: 2020-09-02 16:16:05
Also in:
linux-pci, lkml
On Wed, Sep 02, 2020 at 04:43:43PM +0200, Pali Rohár wrote:
quoted hunk ↗ jump to hunk
Driver ->power_on and ->power_off callbacks leaks internal SMCC firmware return codes to phy caller. This patch converts SMCC error codes to standard linux errno codes. Include file linux/arm-smccc.h already provides defines for SMCC error codes, so use them instead of custom driver defines. Note that return value is signed 32bit, but stored in unsigned long type with zero padding. Signed-off-by: Pali Rohár <pali@kernel.org> --- drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 14 +++++++++++--- drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 14 +++++++++++--- 2 files changed, 22 insertions(+), 6 deletions(-)diff --git a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c index 1a138be8bd6a..810f25a47632 100644 --- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c +++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c@@ -26,7 +26,6 @@ #define COMPHY_SIP_POWER_ON 0x82000001 #define COMPHY_SIP_POWER_OFF 0x82000002 #define COMPHY_SIP_PLL_LOCK 0x82000003 -#define COMPHY_FW_NOT_SUPPORTED (-1) #define COMPHY_FW_MODE_SATA 0x1 #define COMPHY_FW_MODE_SGMII 0x2@@ -112,10 +111,19 @@ static int mvebu_a3700_comphy_smc(unsigned long function, unsigned long lane, unsigned long mode) { struct arm_smccc_res res; + s32 ret; arm_smccc_smc(function, lane, mode, 0, 0, 0, 0, 0, &res); + ret = res.a0; - return res.a0;
+ switch (ret) {
+ case SMCCC_RET_SUCCESS:
+ return 0;
+ case SMCCC_RET_NOT_SUPPORTED:
+ return -EOPNOTSUPP;
+ default:
+ return -EINVAL;
+ }
}Hi Pali Maybe this should be a global helper translating SMCCC_RET_* into a standard errno value? Andrew _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel