[PATCH v2 15/40] PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus
From: Rob Herring <robh@kernel.org>
Date: 2020-08-21 03:55:42
Also in:
linux-amlogic, linux-arm-msm, linux-omap, linux-pci, linux-samsung-soc, linux-tegra
Subsystem:
pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers:
Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
TI keystone is the only Designware driver using .scan_bus(). This function pointer is the only thing preventing the Designware driver from using pci_host_probe(). Let's use the pci_ops.add_bus hook instead. Cc: Murali Karicheri <redacted> Cc: Lorenzo Pieralisi <redacted> Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rob Herring <robh@kernel.org> --- drivers/pci/controller/dwc/pci-keystone.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 2b0906e1e0d3..fd000384fd2a 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c@@ -454,15 +454,19 @@ static struct pci_ops ks_child_pcie_ops = { }; /** - * ks_pcie_v3_65_scan_bus() - keystone scan_bus post initialization + * ks_pcie_v3_65_add_bus() - keystone add_bus post initialization * * This sets BAR0 to enable inbound access for MSI_IRQ register */ -static void ks_pcie_v3_65_scan_bus(struct pcie_port *pp) +static int ks_pcie_v3_65_add_bus(struct pci_bus *bus) { + struct pcie_port *pp = bus->sysdata; struct dw_pcie *pci = to_dw_pcie_from_pp(pp); struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); + if (!pci_is_root_bus(bus)) + return 0; + /* Configure and set up BAR0 */ ks_pcie_set_dbi_mode(ks_pcie);
@@ -477,12 +481,15 @@ static void ks_pcie_v3_65_scan_bus(struct pcie_port *pp) * be sufficient. Use physical address to avoid any conflicts. */ dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start); + + return 0; } static struct pci_ops ks_pcie_ops = { .map_bus = dw_pcie_own_conf_map_bus, .read = pci_generic_config_read, .write = pci_generic_config_write, + .add_bus = ks_pcie_v3_65_add_bus, }; /**
@@ -842,7 +849,6 @@ static int __init ks_pcie_host_init(struct pcie_port *pp) static const struct dw_pcie_host_ops ks_pcie_host_ops = { .host_init = ks_pcie_host_init, .msi_host_init = ks_pcie_msi_host_init, - .scan_bus = ks_pcie_v3_65_scan_bus, }; static const struct dw_pcie_host_ops ks_pcie_am654_host_ops = {
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel