[PATCH 1/1] usb: dwc3: meson-g12a: fix shared reset control use
From: Dan Robertson <dan@dlrobertson.com>
Date: 2020-07-13 16:08:00
Also in:
linux-amlogic, linux-usb
Subsystem:
designware usb3 drd ip driver, the rest, usb subsystem · Maintainers:
Thinh Nguyen, Linus Torvalds, Greg Kroah-Hartman
The reset is a shared reset line, but reset_control_reset is still used
and reset_control_deassert is not guaranteed to have been called before
the first reset_control_assert call. When suspending the following
warning may be seen:
WARNING: CPU: 1 PID: 5530 at drivers/reset/core.c:355 reset_control_assert+0x184/0x19c
Hardware name: Hardkernel ODROID-N2 (DT)
[..]
pc : reset_control_assert+0x184/0x19c
lr : dwc3_meson_g12a_suspend+0x68/0x7c
[..]
Call trace:
reset_control_assert+0x184/0x19c
dwc3_meson_g12a_suspend+0x68/0x7c
platform_pm_suspend+0x28/0x54
__device_suspend+0x590/0xabc
dpm_suspend+0x104/0x404
dpm_suspend_start+0x84/0x1bc
suspend_devices_and_enter+0xc4/0x4fc
pm_suspend+0x198/0x2d4
Fixes: 6d9fa35a347a87 ("usb: dwc3: meson-g12a: get the reset as shared")
Signed-off-by: Dan Robertson <dan@dlrobertson.com>
---
drivers/usb/dwc3/dwc3-meson-g12a.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index 1f7f4d88ed9d..88b75b5a039c 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c@@ -737,13 +737,13 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) goto err_disable_clks; } - ret = reset_control_reset(priv->reset); + ret = reset_control_deassert(priv->reset); if (ret) - goto err_disable_clks; + goto err_assert_reset; ret = dwc3_meson_g12a_get_phys(priv); if (ret) - goto err_disable_clks; + goto err_assert_reset; ret = priv->drvdata->setup_regmaps(priv, base); if (ret)
@@ -752,7 +752,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) if (priv->vbus) { ret = regulator_enable(priv->vbus); if (ret) - goto err_disable_clks; + goto err_assert_reset; } /* Get dr_mode */
@@ -765,13 +765,13 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) ret = priv->drvdata->usb_init(priv); if (ret) - goto err_disable_clks; + goto err_assert_reset; /* Init PHYs */ for (i = 0 ; i < PHY_COUNT ; ++i) { ret = phy_init(priv->phys[i]); if (ret) - goto err_disable_clks; + goto err_assert_reset; } /* Set PHY Power */
@@ -809,6 +809,9 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) for (i = 0 ; i < PHY_COUNT ; ++i) phy_exit(priv->phys[i]); +err_assert_reset: + reset_control_assert(priv->reset); + err_disable_clks: clk_bulk_disable_unprepare(priv->drvdata->num_clks, priv->drvdata->clks);
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel