[RFC PATCH V7 3/3] dts: arm64: mt8183: Add sensor interface nodes
From: Louis Kuo <hidden>
Date: 2020-07-08 10:40:35
Also in:
linux-devicetree, linux-media, linux-mediatek
Subsystem:
arm/mediatek soc support, the rest · Maintainers:
Matthias Brugger, AngeloGioacchino Del Regno, Linus Torvalds
Add nodes for Mediatek's sensor interface device. Sensor interface module embedded in Mediatek SOCs, works as a HW camera interface controller intended for image and data transmission between cameras and host devices. Signed-off-by: Louis Kuo <redacted> --- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 26 ++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 7b781eb7edd7..d487e539705c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi@@ -762,5 +762,31 @@ reg = <0 0x1a000000 0 0x1000>; #clock-cells = <1>; }; + + seninf: seninf@1a040000 { + compatible = "mediatek,mt8183-seninf"; + reg = <0 0x1a040000 0 0x8000>; + interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>; + clocks = <&camsys CLK_CAM_SENINF>, + <&topckgen CLK_TOP_MUX_SENINF>; + clock-names = "cam_seninf", "top_mux_seninf"; + phys = <&mipi_dphy 0>; + phy-names = "seninf"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + + seninf_camisp_endpoint: endpoint { + remote-endpoint = <&camisp_endpoint>; + }; + }; + }; + }; }; }; --
2.18.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel