[RFC PATCH V5 3/3] dts: arm64: mt8183: Add sensor interface nodes
From: Louis Kuo <hidden>
Date: 2020-01-29 08:17:19
Also in:
linux-devicetree, linux-media, linux-mediatek
Subsystem:
arm/mediatek soc support, the rest · Maintainers:
Matthias Brugger, AngeloGioacchino Del Regno, Linus Torvalds
Add nodes for Mediatek's sensor interface device. Sensor interface module embedded in Mediatek SOCs, works as a HW camera interface controller intended for image and data transmission between cameras and host devices. Signed-off-by: Louis Kuo <redacted> --- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 66aaa07f6cec..ae89386afe56 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi@@ -505,5 +505,17 @@ reg = <0 0x1a000000 0 0x1000>; #clock-cells = <1>; }; + seninf: seninf@1a040000 { + compatible = "mediatek,mt8183-seninf"; + reg = <0 0x1a040000 0 0x8000>, + <0 0x11c80000 0 0x6000>; + reg-names = "base", "rx"; + interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>; + clocks = <&camsys CLK_CAM_SENINF>, + <&topckgen CLK_TOP_MUX_SENINF>; + clock-names = "CLK_CAM_SENINF", "CLK_TOP_MUX_SENINF"; + status = "disabled"; + }; }; };
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel