[PATCH v5 26/27] clk: bcm2835: Don't cache the PLLB rate
From: Maxime Ripard <hidden>
Date: 2020-06-15 08:42:07
Also in:
linux-clk, lkml
Subsystem:
common clk framework, the rest · Maintainers:
Michael Turquette, Stephen Boyd, Linus Torvalds
The PLLB rate will be changed through the firmware clocks drivers and will change behind this drivers' back, so we don't want to cache the rate. Acked-by: Nicolas Saenz Julienne <redacted> Tested-by: Nicolas Saenz Julienne <redacted> Signed-off-by: Maxime Ripard <redacted> --- drivers/clk/bcm/clk-bcm2835.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index b50f00f109bf..027eba31f793 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c@@ -1700,7 +1700,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { .min_rate = 600000000u, .max_rate = 3000000000u, - .max_fb_rate = BCM2835_MAX_FB_RATE), + .max_fb_rate = BCM2835_MAX_FB_RATE, + .flags = CLK_GET_RATE_NOCACHE), [BCM2835_PLLB_ARM] = REGISTER_PLL_DIV( SOC_ALL, .name = "pllb_arm",
@@ -1710,7 +1711,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { .load_mask = CM_PLLB_LOADARM, .hold_mask = CM_PLLB_HOLDARM, .fixed_divider = 1, - .flags = CLK_SET_RATE_PARENT), + .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE), /* * PLLC is the core PLL, used to drive the core VPU clock.
--
git-series 0.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel