[PATCH 1/9] dt-bindings: reset: Add a binding for the RPi Firmware USB reset
From: Nicolas Saenz Julienne <hidden>
Date: 2020-06-08 19:27:33
Also in:
linux-devicetree, linux-pci, linux-usb, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The firmware running on the RPi VideoCore can be used to reset and initialize the board's xHCI controller. The reset controller is passed to the PCI device through the DT, hence this binding. Signed-off-by: Nicolas Saenz Julienne <redacted> --- .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 21 +++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
index b48ed875eb8e..8f9d0986c28f 100644
--- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml@@ -39,6 +39,22 @@ properties: - compatible - "#clock-cells" + usb-reset: + type: object + + properties: + compatible: + const: raspberrypi,firmware-usb-reset + + "#clock-cells": + const: 0 + description: > + There is only one reset line available, so no need for cell decoding. + + required: + - compatible + - "#reset-cells" + additionalProperties: false required:
@@ -55,5 +71,10 @@ examples: compatible = "raspberrypi,firmware-clocks"; #clock-cells = <1>; }; + + usb_reset: usb-reset { + compatible = "raspberrypi,firmware-usb-reset"; + #reset-cells = <0>; + }; }; ...
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel