Thread (32 messages) 32 messages, 2 authors, 2020-05-22

Re: [PATCH v5 01/19] spi: spi-mem: allow specifying whether an op is DTR or not

From: <hidden>
Date: 2020-05-21 08:27:57
Also in: linux-mediatek, linux-spi, lkml

Hi Pratyush,

Given cmd.nbytes a initial value & check it !
[PATCH v5 01/19] spi: spi-mem: allow specifying whether an op is DTR or 
not
quoted hunk ↗ jump to hunk
Each phase is given a separate 'dtr' field so mixed protocols like
4S-4D-4D can be supported.

Signed-off-by: Pratyush Yadav <redacted>
---
 drivers/spi/spi-mem.c       | 3 +++
 include/linux/spi/spi-mem.h | 8 ++++++++
 2 files changed, 11 insertions(+)
diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index 9a86cc27fcc0..93e255287ab9 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -156,6 +156,9 @@ bool spi_mem_default_supports_op(struct spi_mem 
*mem,
                op->data.dir == SPI_MEM_DATA_OUT))
       return false;

+   if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr)
+      return false;
+
+       if (op->cmd.nbytes != 1)
+               return false;
    return true;
 }
 EXPORT_SYMBOL_GPL(spi_mem_default_supports_op);

 static int spi_mem_check_op(const struct spi_mem_op *op)
 {
-                if (!op->cmd.buswidth)
+                if (!op->cmd.buswidth || op->cmd.nbytes < 1 || 
op->cmd.nbytes > 2)
                                 return -EINVAL;

quoted hunk ↗ jump to hunk
diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
index af9ff2f0f1b2..e3dcb956bf61 100644
--- a/include/linux/spi/spi-mem.h
+++ b/include/linux/spi/spi-mem.h
#define SPI_MEM_OP_CMD(__opcode, __buswidth)                    \
         {                                                       \
                 .buswidth = __buswidth,                         \
                 .opcode = __opcode,                             \
+                .nbytes = 1,                                    \
         }


quoted hunk ↗ jump to hunk
@@ -71,9 +71,11 @@ enum spi_mem_data_dir {
  * struct spi_mem_op - describes a SPI memory operation
  * @cmd.buswidth: number of IO lines used to transmit the command
  * @cmd.opcode: operation opcode
+ * @cmd.dtr: whether the command opcode should be sent in DTR mode or 
not
  * @addr.nbytes: number of address bytes to send. Can be zero if the 
operation
  *       does not need to send an address
  * @addr.buswidth: number of IO lines used to transmit the address 
cycles
+ * @addr.dtr: whether the address should be sent in DTR mode or not
  * @addr.val: address value. This value is always sent MSB first on the 
bus.
  *         Note that only @addr.nbytes are taken into account in this
  *         address value, so users should make sure the value fits in 
the
quoted hunk ↗ jump to hunk
@@ -81,7 +83,9 @@ enum spi_mem_data_dir {
  * @dummy.nbytes: number of dummy bytes to send after an opcode or 
address. Can
  *        be zero if the operation does not require dummy bytes
  * @dummy.buswidth: number of IO lanes used to transmit the dummy bytes
+ * @dummy.dtr: whether the dummy bytes should be sent in DTR mode or 
not
  * @data.buswidth: number of IO lanes used to send/receive the data
+ * @data.dtr: whether the data should be sent in DTR mode or not
  * @data.dir: direction of the transfer
  * @data.nbytes: number of data bytes to send/receive. Can be zero if 
the
quoted hunk ↗ jump to hunk
  *       operation does not involve transferring data
@@ -91,22 +95,26 @@ enum spi_mem_data_dir {
 struct spi_mem_op {
    struct {
       u8 buswidth;
+      u8 dtr : 1;
       u8 opcode;
    } cmd;

    struct {
       u8 nbytes;
       u8 buswidth;
+      u8 dtr : 1;
       u64 val;
    } addr;

    struct {
       u8 nbytes;
       u8 buswidth;
+      u8 dtr : 1;
    } dummy;

    struct {
       u8 buswidth;
+      u8 dtr : 1;
       enum spi_mem_data_dir dir;
       unsigned int nbytes;
       union {
-- 
2.26.2
thanks & best regards,
Mason

CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information 
and/or personal data, which is protected by applicable laws. Please be 
reminded that duplication, disclosure, distribution, or use of this e-mail 
(and/or its attachments) or any part thereof is prohibited. If you receive 
this e-mail in error, please notify us immediately and delete this mail as 
well as its attachment(s) from your system. In addition, please be 
informed that collection, processing, and/or use of personal data is 
prohibited unless expressly permitted by personal data protection laws. 
Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================



============================================================================

CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help