[PATCH v5 11/19] mtd: spi-nor: core: do 2 byte reads for SR and FSR in DTR mode
From: Pratyush Yadav <hidden>
Date: 2020-05-19 14:28:02
Also in:
linux-mediatek, linux-spi, lkml
Subsystem:
memory technology devices (mtd), spi nor subsystem, the rest · Maintainers:
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Pratyush Yadav, Michael Walle, Linus Torvalds
Some controllers, like the cadence qspi controller, have trouble reading only 1 byte in DTR mode. So, do 2 byte reads for SR and FSR commands in DTR mode, and then discard the second byte. Signed-off-by: Pratyush Yadav <redacted> --- drivers/mtd/spi-nor/core.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 2ad248140b6c..5cb7e391cd29 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c@@ -350,7 +350,7 @@ int spi_nor_write_disable(struct spi_nor *nor) * spi_nor_read_sr() - Read the Status Register. * @nor: pointer to 'struct spi_nor'. * @sr: pointer to a DMA-able buffer where the value of the - * Status Register will be written. + * Status Register will be written. Should be at least 2 bytes. * * Return: 0 on success, -errno otherwise. */
@@ -371,6 +371,11 @@ static int spi_nor_read_sr(struct spi_nor *nor, u8 *sr) op.addr.nbytes = addr_bytes; op.addr.val = 0; op.dummy.nbytes = dummy; + /* + * We don't want to read only one byte in DTR mode. So, + * read 2 and then discard the second byte. + */ + op.data.nbytes = 2; } spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
@@ -394,7 +399,8 @@ static int spi_nor_read_sr(struct spi_nor *nor, u8 *sr) * spi_nor_read_fsr() - Read the Flag Status Register. * @nor: pointer to 'struct spi_nor' * @fsr: pointer to a DMA-able buffer where the value of the - * Flag Status Register will be written. + * Flag Status Register will be written. Should be at least 2 + * bytes. * * Return: 0 on success, -errno otherwise. */
@@ -415,6 +421,11 @@ static int spi_nor_read_fsr(struct spi_nor *nor, u8 *fsr) op.addr.nbytes = addr_bytes; op.addr.val = 0; op.dummy.nbytes = dummy; + /* + * We don't want to read only one byte in DTR mode. So, + * read 2 and then discard the second byte. + */ + op.data.nbytes = 2; } spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel